Hi,
This took me some time to figure out so thought some people here might find this helpful:
How to install a backup camera on a 2nd gen Tundra (2007-2013).
I followed these instructions:
http://www.tundratal...a-diy-45-a.html
Except I did not have voltage for some reason, so I added the ground (small black big white ) and 12v ( small red big blue) mentioned here
I added these to the ground and 12v in the initial instructions (I did not run wires to the front) and things worked great after that.
I used these:
https://smile.amazon...ailpage_o03_s00
https://smile.amazon...ailpage_o03_s01
Here you go, a backup camera for 40 dollars!
Note, apparently some 2012+ are wired but the wires aren't working. Read the tundratalk thread for details. Things worked well on my 2011.
H
Edited by Herve, 20 November 2017 - 05:32 AM.
