FWC Swift Ordered - Now to prep the truck :-)
#11
Posted 14 December 2017 - 06:34 AM
#12
Posted 14 December 2017 - 02:30 PM
The bags are nice so you don’t have overly stiff springs when the camper is off the truck.
Hodakaguy
My 4wd Sprinter Build: CLICK HERE
My Unimog U1300L Build: CLICK HERE
My VW Syncro Westy Build: CLICK HERE
My Tacoma/FWC Builds: CLICK HERE
Ride Report - In Memory Of The Crewmen: CLICK HERE
#13
Posted 14 December 2017 - 09:23 PM
I have a Tundra with the OME and add a leaf and the Firestone airbags with the 2" spacer to compensate for the lift.
What are these Daystar cradles yall speaking of? Better than spacers I assume?
Thanks
Kevin
Follow My Shenanigans: instagram.com/campermccampface
#14
Posted 15 December 2017 - 12:58 PM
I have a Tundra with the OME and add a leaf and the Firestone airbags with the 2" spacer to compensate for the lift.
What are these Daystar cradles yall speaking of? Better than spacers I assume?
Thanks
Kevin
I have a Tundra with the OME and add a leaf and the Firestone airbags with the 2" spacer to compensate for the lift.
What are these Daystar cradles yall speaking of? Better than spacers I assume?
Thanks
Kevin
The Cradles allow the bags to flex without tearing the bags, it also allows the truck to flex withing limiting it's travel. Here a picture of one mounted up.
http://forum.expedit...-Airbag-Cradles
My 4wd Sprinter Build: CLICK HERE
My Unimog U1300L Build: CLICK HERE
My VW Syncro Westy Build: CLICK HERE
My Tacoma/FWC Builds: CLICK HERE
Ride Report - In Memory Of The Crewmen: CLICK HERE
#15
Posted 17 December 2017 - 09:23 PM
Thanks Hodakaguy, I will look into these for sure!
I just installed the 2" firestone spacers to compensate for my OME lift and I am not too stoked on how it all fits. These cradles look like a much better solution!
Thanks
Kevin
Follow My Shenanigans: instagram.com/campermccampface
#16
Posted 18 December 2017 - 04:18 PM
The Cradles allow the bags to flex without tearing the bags, it also allows the truck to flex withing limiting it's travel. Here a picture of one mounted up.
I am going to have to look into these.
I have a 2011 Tacoma (4 door long bed) with a front dinete fleet.
we used to have a 93 Pastime, and at that time, I made my own long-leaf add-a-leaves out of some other spring packs I had laying around (I have no idea what they were out of)
Plus I added some air bags that I raised the bottom mount some, by welding on spacers.
I have never been completely satisfied with this setup, and keep saying that I am going to redo it all (mostly just the air bags mounts).
So these cradles might be a good place to start.
Edited by MattC, 18 December 2017 - 04:20 PM.
#17
Posted 20 December 2017 - 08:56 PM
Cradles arrived today, and will be installed this weekend!
Thanks for the tip!
Follow My Shenanigans: instagram.com/campermccampface
#18
Posted 21 December 2017 - 05:17 AM
Thanks Hodakaguy, I will look into these for sure!
I just installed the 2" firestone spacers to compensate for my OME lift and I am not too stoked on how it all fits. These cradles look like a much better solution!
Thanks
Kevin
You will be real happy with this combo. I run Daystar's with Firestone bags on a Tundra/Hawk and they work great.
#19
Posted 21 December 2017 - 07:44 AM
You will be real happy with this combo. I run Daystar's with Firestone bags on a Tundra/Hawk and they work great.
Awesome! Thanks Bob!
What pressure do you run the bags at? What rear springs.
Thanks
Follow My Shenanigans: instagram.com/campermccampface
#20
Posted 24 December 2017 - 05:09 PM
Cradles arrived today, and will be installed this weekend!
Thanks for the tip!
Out of curiosity, where did you get them, and how much were they?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users