Jump to content


Photo

Advise on buying 1992 Four Wheel


  • Please log in to reply
2 replies to this topic

#1 Pebrown2

Pebrown2

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 16 February 2019 - 12:53 AM

Will look at it tomorrow. Looks good in pics. Owner says little water damage to floor in front of stove and back coners by door. Asking $200. Is willing to negotiate. Any things I should look for?
Thanks for the two quick replies.
It's going on a RAM 2500 long bed.

Edited by Pebrown2, 16 February 2019 - 01:37 AM.

  • 0

#2 DavidGraves

DavidGraves

    Senior Member

  • Members
  • 1,267 posts

Posted 16 February 2019 - 01:21 AM

Howdy

 

Make sure it will fit you truck....specifically the width of camper bottom between wheel wells of your truck.

 

Many other size/weight parameters come into play but the width of the bottom "floor pak" of the camper must fit between your wheel wells inside of bed.

 

Tell us more !

 

David Graves


  • 0

#3 Wandering Sagebrush

Wandering Sagebrush

    Free Range Human

  • Site Team
  • 10,565 posts
  • LocationNortheast Oregon

Posted 16 February 2019 - 01:26 AM

Make sure it will fit your truck. There is a fit guide on the FWC site. I’d look very carefully at the water damage and source of the leak. It might be a total floor pack replacement if the rot is too far advanced. If there is propane available, check the stove and furnace. Check the water system if possible. Look at the conditions of the lift boards, they may be rotted as well. Look for holes or cracking in the vinyl.

At that price, you might be getting a good deal, even if it needs a rebuild. If you’re close to Sacramento, the team at ATC is known and respected for their campers, and their repair of older FWC campers. They do great work and have reasonable prices.
  • 1

I am haunted by waters





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users