Are ATC camper roofs 1 or 2pc?
#1
Posted 25 October 2019 - 10:05 PM
#2
Posted 25 October 2019 - 10:39 PM
My 2¢... They have a seam, but I believe it’s that way from the source. The ATC roof is Also screwed down, which I believe is a better construction technique, and stronger. My Grandby oil canned, my Bobcat roof was bullet proof.
I am haunted by waters
#3
Posted 25 October 2019 - 11:24 PM
To the best of my knowledge they are two piece and screwed down. And in my opinion, 100 times better than FWC's one piece. If I had the money to spend, I would have ATC replace the roof and canvas on my 2013 FWC.
"Not all who wander are lost. Except Ted, he's usually lost." Dirty Dog
#4
Posted 25 October 2019 - 11:41 PM
#5
Posted 26 October 2019 - 12:11 AM
ATC gets the entire assembled roof delivered. Although 2 pieces - seam down the middle, joined at the manufacturer under pressure - it is essentially a one piece roof. It is also more robust and rigid than the original 2 piece roof used in the older FWC's.
2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln http://ski3pin.blogspot.com/
#6
Posted 26 October 2019 - 12:39 AM
#7
Posted 26 October 2019 - 09:15 PM
As other ATC owners IMO their roof is the best.
Two piece factory joined and screwed down.
No problems with my 10 year old roof.
Frank
PS Welcome to the cult.
Are you considering a ATC camper check them out and ask/compare.
Lots of info on this site.
IMO they are the BEST.
2002 Tundra AC TRD 4WD Limited 2009 ATC Bobcat loaded http://sharychic.blogspot.com/
#8
Posted 26 October 2019 - 09:33 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users