Tacoma suspension upgrades?
#1
Posted 11 November 2011 - 03:38 AM
I’m looking to get a new v6 Tacoma 4x4 so that I can better support a FWC Fleet. My question is what do I need to get related to suspension or other upgrades? I could care less about TRD decals, or anything I absolutely don’t need functionally.
The Toyota tow package adds a transmission cooler, engine cooler, 130 amp altenator, and heavy duty battery.
The TRD off road package adds a ton of useless stuff but does include Off-road-tuned suspension with Bilstein® shock absorbers, electronically controlled locking rear differential, 16-in. alloy wheels with P265/70R16 BFGoodrich® tires, Active Traction Control (A-TRAC) (4x4 models only) with Hill Start Assist Control (HAC) [20] and Downhill Assist Control (DAC) [20] (HAC and DAC available on 4x4 automatic transmission models only).
My question is – do I need any of this extra stuff? Or can I get the base V6 4x4, add some air bags, and will I be good to go?
#2
Posted 11 November 2011 - 04:31 AM
Now the 3/4 ton and 1 tons guys are going to chime in and say.....just buy a bigger truck because its safer and can stop faster and while you are at it buy a diesel because it gets better gas mileage. There is some truth to this, and if I had $35,000+ in disposable income I would likely do it as well, but I think that some people blow it way out of proportion. With the price of diesel and the maintenance costs it takes quite a long time to recover that money via better gas mileage.
Their is a huge safety of factor that goes into GVWR numbers. You don't want to be stupid about it but if you are reasonable a half ton truck such as a Tacoma with the appropriate suspension upgrades is an extremely capable vehicle and can be a much more affordable option. On the other side if you are the type of person that has trouble leaving stuff at home and feels the need to bring everything you may be better off with a 3/4 ton or 1 ton.
The one thing that I can't emphasize enough is PLEASE PLEASE don't just put airbags or timbrems on a Tacoma and think that it will make it capable of carrying the extra weight....especially if you plan on doing any offroading. You will end up tweaking or breaking your frame and in all honesty the truck will not be that safe and may leave you hanging out to dry when you really don't want it to. If you want to run one of these campers on a Tacoma or similar 1/2 ton truck you have to be committed to upgrading the suspension...both front and back in my opinion.
Check out some of my mods to see what I'm talking about.
Good Luck,
Cort
PS
The DAC may help you save your brakes but a standard transmission would be much better. the rear Dif locker can be acquired aftermarket and will be much better. The larger stock tires....why pay more for larger crap...get them aftermarket and get real rubber. You will want to upgrade to load range D or E tires.
Edited by Cort, 11 November 2011 - 04:37 AM.
#3
Posted 11 November 2011 - 08:05 PM
#4
Posted 15 November 2011 - 10:07 PM
I currently have a 4 cyl, manual transmission, 2006 Tacoma 4x4. The most basic you can get. I’ve done a lot of stuff with it and love it, it does everything I need. I do quite a bit of off road, some light 4x4, but not real hard core.
I’m looking to get a new v6 Tacoma 4x4 so that I can better support a FWC Fleet. My question is what do I need to get related to suspension or other upgrades? I could care less about TRD decals, or anything I absolutely don’t need functionally.
The Toyota tow package adds a transmission cooler, engine cooler, 130 amp altenator, and heavy duty battery.
The TRD off road package adds a ton of useless stuff but does include Off-road-tuned suspension with Bilstein® shock absorbers, electronically controlled locking rear differential, 16-in. alloy wheels with P265/70R16 BFGoodrich® tires, Active Traction Control (A-TRAC) (4x4 models only) with Hill Start Assist Control (HAC) [20] and Downhill Assist Control (DAC) [20] (HAC and DAC available on 4x4 automatic transmission models only).
My question is – do I need any of this extra stuff? Or can I get the base V6 4x4, add some air bags, and will I be good to go?
I'd add the Firestone air suspension... I have a 4 cylinder Tacoma and it handles great with the Eagle.
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#5
Posted 15 November 2011 - 10:08 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#6
Posted 22 November 2011 - 12:38 AM
I currently have a 4 cyl, manual transmission, 2006 Tacoma 4x4. The most basic you can get. I’ve done a lot of stuff with it and love it, it does everything I need. I do quite a bit of off road, some light 4x4, but not real hard core.
I’m looking to get a new v6 Tacoma 4x4 so that I can better support a FWC Fleet. My question is what do I need to get related to suspension or other upgrades? I could care less about TRD decals, or anything I absolutely don’t need functionally.
The Toyota tow package adds a transmission cooler, engine cooler, 130 amp altenator, and heavy duty battery.
The TRD off road package adds a ton of useless stuff but does include Off-road-tuned suspension with Bilstein® shock absorbers, electronically controlled locking rear differential, 16-in. alloy wheels with P265/70R16 BFGoodrich® tires, Active Traction Control (A-TRAC) (4x4 models only) with Hill Start Assist Control (HAC) [20] and Downhill Assist Control (DAC) [20] (HAC and DAC available on 4x4 automatic transmission models only).
My question is – do I need any of this extra stuff? Or can I get the base V6 4x4, add some air bags, and will I be good to go?
I just bought a 2011 V6 SR5 w/tow package [manual transmission]. The SR5 has all the functional stuff like variable rate wipers, cruise control, auto windows/locks, sliding rear window ect. The tow package beefs up the alternator, and oil cooler [tranny too on the auto]. The TRD just has a lot of "aftermarket" items - that cost as much as the aftermarket stuff w/o the benefits of customization and function. Save the money from the TRD package and just buy what you want in aftermarket goodies - for exactly the application you plan on using it for.
#7
Posted 22 November 2011 - 04:33 AM
If you would like some pictures send me a message..
robbie
#8
Posted 14 February 2012 - 02:22 AM
I have a 2007 tacoma 2wd 4 cylinder.. reg cab/bed etc.. except got auto trans. Wanted manual.. but hard to find. At any rate I found an '83 fleet model last august and I just added timbrens (timbren.com). Which are something of a specialized bump stop built to compensate for heavy loads. Works really well and very easy to install. Just unbolted the old bumpstops and put the timbrens in their place. It was so easy that I thought I must have done something wrong at first. They work great. I don't even notice they are there with the exception that my truck doesn't sag like it would otherwise. With all the complaints of "air bags" getting leaks and popping and such I'm surprised that timbrens aren't used more. Nothing to pump up or anything. .. Just pieces of rubber bolted into place that do their job quite well.
#9
Posted 15 February 2012 - 12:03 PM
I originally just had the SuperSprings, which increased handling but did not address the sagging, hence the reason why I ended up installing the Airbags.
If I could do it all again, I would have completely replaced the Rear leaf springs with some heavier duty ones and installed Airbags.
#10
Posted 19 February 2012 - 01:00 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users