Hodkaguy, who fabricated the aluminum mount for you? Very nice job on the fit and finish!
Removing Yakima tracks and current solar panel from one piece roof
#11
Posted 26 November 2014 - 07:41 AM
Ford 2018 F250 FX4,Lariat, Gasser. FWC 2013 Hawk W6QN (formerly KH6FBU)
#12
Posted 26 November 2014 - 01:03 PM
Hodkaguy, who fabricated the aluminum mount for you? Very nice job on the fit and finish!
A local fab shop with a water jet cutter fabricated the aluminum backing panel as well as cutting/bending the brackets to the proper angles. Any shop that is local and has a water jet cutter should be able to fabricate something similar.
Here's a link to my build thread with more info on the solar setup: http://www.advrider....=802924&page=47
Hodakaguy
My 4wd Sprinter Build: CLICK HERE
My Unimog U1300L Build: CLICK HERE
My VW Syncro Westy Build: CLICK HERE
My Tacoma/FWC Builds: CLICK HERE
Ride Report - In Memory Of The Crewmen: CLICK HERE
#13
Posted 26 November 2014 - 04:48 PM
A local fab shop with a water jet cutter fabricated the aluminum backing panel as well as cutting/bending the brackets to the proper angles. Any shop that is local and has a water jet cutter should be able to fabricate something similar.
Here's a link to my build thread with more info on the solar setup: http://www.advrider....=802924&page=47
Hodakaguy
Thank you for the build thread. Amazing job on the install! I can imagine a nice panel on my Hawk.
Ford 2018 F250 FX4,Lariat, Gasser. FWC 2013 Hawk W6QN (formerly KH6FBU)
#14
Posted 27 December 2014 - 03:57 PM
Hodaguy - what thickness of aluminum did you use?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users