Plywood is strong, but it doesn't take concentrated loads very well - particularly in a mid-span like the pics above. They need to be distributed loads. I would move the eye-bolt over closer to the corner of the horizontal plywood that it is in, and the lower vertical plywood. Make 'L' shaped steel plates to lay over the corner on the inside and be bolted thru both plywood pieces. A plate on the outside would need to be thru-bolted to the inside plate for it to add any strength to the mount. Just captured there it does nothing.
10 replies to this topic
#11
Posted 22 May 2018 - 03:40 AM
Thom
Where does that road go?
Where does that road go?
Also tagged with one or more of these keywords: eyebolts, mounting
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
Self Camper Install on New Ford - Suggestions WelcomeStarted by Ruck_and_Roll , 08 Apr 2021 F150, mounting, tie downs and 1 more... |
|
|
||
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
Where to mount Iota DLS30 Power Converter in 2020 Hawk ShellStarted by UmkaAndHawk , 06 Mar 2020 power, converter, hawk, shell and 2 more... |
|
|
||
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
Mounting an 80's FleetStarted by snowfirenryan , 29 Aug 2017 Fleet, Ram 1500, Mounting and 4 more... |
|
|
||
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
Steel Eyebolts in Aluminum Truck Beds - Ford SVE Bulletin Q-222Started by K7MDL , 21 Jul 2016 F150, eyebolts and 3 more... |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users