Fuze is good .other fan works.its a 802259 model..so sad ..help where else to look??
Dometic fan not working
Started by
dennis 221
, Apr 19 2021 04:50 PM
3 replies to this topic
#1
Posted 19 April 2021 - 04:50 PM
#2
Posted 19 April 2021 - 11:09 PM
drop the fan out and check the wiring, check for 12V at the fuse/switch too.
2015 Silverado 3500 crew cab 8' bed Diesel
2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/
Power considerations thread - https://www.wanderth...e-power-scotty/
Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West
2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/
Power considerations thread - https://www.wanderth...e-power-scotty/
Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West
#3
Posted 19 April 2021 - 11:55 PM
What Vic said, and check that the rod that sits on top of the fan, to one side, is sliding in and out freely. If it is sticking it cuts off the power. It might just need some wd-40 to lube it. This rod is what opens and closes the circuit when you open the lid. It's a safety so the fan can't run when lid is closed.Fuze is good .other fan works.its a 802259 model..so sad ..help where else to look??
Rich
- 2001 Cummins 2500 quad cab 4x4 turbo diesel; NV4500 5-spd manual transmission; CM aluminum flatbed, '20 FWC Hawk shell - hybrid buildout. https://ian-frese-of...r.blogspot.com/
- 2004 Jeep TJ - Rubicon
#4
Posted 26 April 2021 - 02:13 AM
thanks
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users