Love it! Thanks!!!
Fantastic Fan variable speed control
#11
Posted 16 July 2015 - 05:58 AM
#12
Posted 16 July 2015 - 06:47 AM
Hey Guys, when you get your PWM controller, it may not have english notation on the circuit board to tell which is the 12v in and motor out connections. I wrote to the vendor of the eBay link I placed here and they sent this photo of the proper connection points.
Ford 2018 F250 FX4,Lariat, Gasser. FWC 2013 Hawk W6QN (formerly KH6FBU)
#13
Posted 16 July 2015 - 01:56 PM
Thanks!
2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln http://ski3pin.blogspot.com/
#14
Posted 16 July 2015 - 02:35 PM
I am haunted by waters
#15
Posted 16 July 2015 - 03:26 PM
Hey Guys, when you get your PWM controller, it may not have english notation on the circuit board to tell which is the 12v in and motor out connections. I wrote to the vendor of the eBay link I placed here and they sent this photo of the proper connection points.
A picture is worth a thousand words. Thanks again!
2021 RAM 3500 Crew 4x4, 6.4 hemi/8 speed trans with 4.10 gears, Timber Grove bags, Falken Wildpeak 35" tires.
OEV Aluma 6.75 flatbed, Bundutec Odyssey camper on order for 2024
For this year we're still using our 2008 FWC Hawk with victron DC-DC charger, 130w solar, MPPT controler
with 2000w inverter and external 120v output and 12v solar input with 100w portable solar. http://lighthawkphoto.com
#16
Posted 16 July 2015 - 06:38 PM
A picture is worth a thousand words. Thanks again!
+ 1,000
Bill Harr 2005 Tundra and a 2013 Hawk custom interior.
#17
Posted 27 July 2015 - 04:26 AM
Got my controller, will start project later this week.
Bill Harr 2005 Tundra and a 2013 Hawk custom interior.
#18
Posted 28 July 2015 - 09:53 PM
Just did my install. I have a buzz
Harv, I got a different controller than you have. It is the one ordered form your link, may be the same one everyone else ordered. Can I do any thing to stop the buzz? I tried going around the old speed switch just to be sure that is not the problem as I left the resistors in but used the switched tab. Anyone else done the install??
This is the controller I have, except the led is green
Edited by billharr, 28 July 2015 - 10:04 PM.
Bill Harr 2005 Tundra and a 2013 Hawk custom interior.
#19
Posted 29 July 2015 - 08:48 AM
Ford 2018 F250 FX4,Lariat, Gasser. FWC 2013 Hawk W6QN (formerly KH6FBU)
#20
Posted 29 July 2015 - 01:38 PM
I will contact the vendor and unwire for now. I was hoping I might be able to put a capacitor in the line but that is beyond my skill set. Getting ready for a trip to Glacier mid Aug so this might have to wait. Others who have purchased the same controller might want to jumper the controller in to give it a try be for a full install. I will post up any information I get from the vendor.
Bill Harr 2005 Tundra and a 2013 Hawk custom interior.
Also tagged with one or more of these keywords: Fan, Fantastic Fan, Modification, Speed adjustment
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
2009 Eagle swap out to a fanStarted by Greeneggsslc , 24 Feb 2020 fan, upgrade, prewired |
|
|
||
Trucks, Campers, Gear Forums →
Truck Campers →
Four Wheel Camper Discussions →
Hawk - Shower repair and Fanstistic FanStarted by wpage66 , 22 Oct 2016 repairs, Shower, vent, fan |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users