seriously impressed... .
Blast from the past - old face & 82' grandby
#31
Posted 19 May 2020 - 12:14 AM
2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/
Power considerations thread - https://www.wanderth...e-power-scotty/
Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West
#32
Posted 25 May 2020 - 03:16 PM
Put it on the truck to move to the new house (of course "sunny" colorado decided rain was in the cards...). Preview of the eventual look/fit, the eyebolts currently in my bed were in the way of the front frame edge so I couldn't slide it all the way forward (IE not planning to have that gap between my front wall, just a thin bumper). The width of the camper actually fits inside the flip walls of the bed as well, I'll probably run with those on most of the time as they'll just shield the lower edge of the camper, I'll just add a thin bumper on each rear corner so the bed walls don't slap into the side of the camper as they vibrate a little.
2007 Dodge 2500 quad cab 4x4 5.7L Hemi auto and slowly progressing build.
FYI: I've got a bunch of extra 14ga wire in red and black. Its a thick jacket 41strand wire (likely MTW wire) verse typical 19strand automotive wire. It has good flexibility but factor in the thick jacket. I'll ship out 100' coils for $18 (I can go 50' of ea for that too) if anyone is in need of wire.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users