Jump to content


Photo
- - - - -

Flat Beds--COG Can Be A Problem!?

CG Center of Gravity Flat Beds Tundra FWC COG FWC Accident Stabiity Flatbed

  • Please log in to reply
21 replies to this topic

#21 Vic Harder

Vic Harder

    Get's a "charge" out of camping!

  • Members
  • 2,448 posts
  • LocationCalgary, Alberta

Posted 02 December 2019 - 06:25 AM

If the bags are plumbed together, then when the truck begins to sway, the lower side pushes the air out of the airbag on the lower side over to the airbag on the higher side, which then pushes it even higher, making the sway worse.  Make sense?

 

To have different pressures on each side I am pretty sure you would need to have them plumbed separately!


  • 0

2006 Silverado 3500 ext cab 8' bed LBZ

2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/

Power considerations thread - https://www.wanderth...e-power-scotty/

 


#22 Taku

Taku

    Buffalo Rockface

  • Members
  • 472 posts

Posted 02 December 2019 - 12:22 PM

We have an 05 Tundra with an ATC Ocelot on the stock bed. Had airbags installed but still did not like the sway. I installed a standard Hellwig sway bar with no problem (did have to do a very slight bend to the brake lines) and it substantially improved the handling. Not sure why the 04 Tundra would be different unless there was a substantial change in the setup. Still running the stock Bilstein suspension too. 


  • 0
2005 Tundra  2013 Ocelot    "Ridiculously comfortable"





Also tagged with one or more of these keywords: CG, Center of Gravity, Flat Beds, Tundra, FWC, COG, FWC Accident, Stabiity, Flatbed

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users