I bought my hawk without the seat back or hinges for the rollover sofa. I’d like to install a new seat back with rollover hinges for added bed space below. I have located replacement rollover hinges, but will need to fabricate a new seat back and cushion..
Does anyone know how the seat back was designed from the factory? What type of support frame there is to handle the weight when in bed mode. It would be really helpful if someone has pictures of the inside frame when they had it reupholstered.
Thanks for any help!
FWC Hawk Roll-Over sofa
Started by
njdevil
, Dec 10 2019 03:10 PM
2 replies to this topic
#1
Posted 10 December 2019 - 03:10 PM
#2
Posted 10 December 2019 - 04:54 PM
Pretty sure its just plywood.
#3
Posted 10 December 2019 - 08:07 PM
This is the seat back from the front dinette. My used shell had a front dinette and I changed to a side dinette. Shorted the alum tubes and reupholstered. Just plywood would work just fine for a seat back. If you hare going to sleep on it go 3/4" plywood.
Bill Harr 2005 Tundra and a 2013 Hawk custom interior.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users