Swapping equipment for our 2017 to the current 2020 truck. The original install was performed by Sean Dempsey from Go Anywhere LLC/WI. We purchased our Grandby from him a great guy and very knowledgeable dealer. Our camper was purchased last August and we decided to order a new F-150 more suitable for our needs. I salvaged the eyebolts, washers, reinforcing plates to reinstall. I Purchased a new wiring harness from FWC and miscellaneous parts locally. I was present and helped Sean with the original truck preparation and that helped with the new set up. Sean also walked me through with the whole install on a phone call. (Great customer service)!
]
I repurposed the 3/8 rubber mat with the eyebolt slots to use as a template for eyebolts. I also repurposed the bed rug for the new truck.
The 2017 bed and 2020 have the same layout. I used the bed rug for a template for the new Attwood camper plug location. Also I repurposed the box links from the old ride all inlined up perfectly. I installed the bed rug bottom without it zippered to the sidewalls for removal for camper installation.
Wiring was easy with Sean’s guidance and my past knowledge of the wiring of our 2017. FWC includes all the necessary components to complete the wiring setup. It took 8 hrs to complete the entire conversion with help from my wife Carol. Looking forward in mounting the camper and heading out when the virus settles. Also a big thanks to Sean Dempsey!
Wayne
Edited by WjColdWater, 05 April 2020 - 12:52 PM.
