Jump to content


Photo

Jack Extension Boxes


  • Please log in to reply
2 replies to this topic

#1 Wooddog

Wooddog

    Member

  • Members
  • PipPip
  • 18 posts
  • LocationThe Baptist Kush of East Tennessee

Posted 04 May 2021 - 11:13 PM

Hey all,  I am traveling from Colorado to Tennessee to pick up my Alaskan in a couple weeks; a 1975 10' cabover I call Dogwood. Old build thread somewhere...

 

I will be putting it on an 8' wide flatbed so I have bought 6"x6" steel tubing to make extension boxes for the Reico-Titan heavy duty tripod jacks. I would like to drill the tubes before I go but I can't measure the bolt holes from here. 

 

Could I trouble someone to measure the jack-to-bracket bolt holes center to center distance? I remember the bolts being 1" diameter, is that correct?

 

Thanks a bunch,

Bruce

 

IMG_0823 (Medium).JPG


  • 0

#2 JoeKan

JoeKan

    Senior Member

  • Members
  • 151 posts
  • LocationKansas

Posted 04 May 2021 - 11:29 PM

Hi Bruce, I measured mine and it was 3 1/2" center to center. The diameter looks like to be is 5/8". Hopefully, someone else will help out with the diameter. 


  • 0

1972 NCO Alaskan 10'


#3 Wooddog

Wooddog

    Member

  • Members
  • PipPip
  • 18 posts
  • LocationThe Baptist Kush of East Tennessee

Posted 05 May 2021 - 03:43 PM

Thanks, Joe.  I thought I remembered the bolts as 1" from when we lost one and had to replace it. I sure don't want to drill 1" if it's only 5/8".


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users