Jump to content


Photo
- - - - -

RAM 2500, 6.7, Hawk Flatbed Camper


  • Please log in to reply
44 replies to this topic

#41 cware

cware

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 27 June 2022 - 03:41 PM

I'll see if I can edit them and get them to work. 

Not seeing the most recent photos...  :(

AM-JKLVKNmqMqJZubg6GHZsyXXrt7zGLARJu4QdF


  • 1

#42 cware

cware

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 27 June 2022 - 03:47 PM

I'm working with Bowen Customs out of Denver and had the opportunity to do a "lower" flatbed. If I went that route I would not have a very deep slide out drawer in the rear and I really wanted a slide out equipment drawer. With the taller height my drawer will be 5.5-6" deep. Any shallower and it would be able to hold many practical items.

 

Bowen looks like they are doing some really nice work. My drawer is a few mm of the 5th wheel hitch plate of the frame. if your going to use the flatbed without a camper a good amount I would go no drawer to get it to a useable height, the storage is awesome though.


  • 0

#43 UncleDougie

UncleDougie

    Member

  • Members
  • PipPip
  • 25 posts
  • LocationChandler, AZ

Posted 28 June 2022 - 01:47 AM

CWARE - Do you feel like the 23Zero awning blocks too much of the rear window? Would you lower it or would that make the awning too low? Love the setup!


  • 0

#44 cware

cware

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 28 June 2022 - 07:48 PM

CWARE - Do you feel like the 23Zero awning blocks too much of the rear window? Would you lower it or would that make the awning too low? Love the setup!

I don't think it blocks that much.....but I'm 6'2 so when at the dinette I can see anything anyways. I'm sure it will take a few trips till I figure out the placement. I have also broken that back window so part of me wants it to be a shield for the boulders those tires thorough.  :)


  • 0

#45 cware

cware

    Advanced Member

  • Members
  • PipPipPip
  • 31 posts

Posted 12 August 2022 - 04:35 PM

Rack all done and now on 37" Wildpeaks. 

 

AL9nZEXvs5as3TbOdmGsPcICihGshI9s5u-UoI93AL9nZEX8dyhDJ8dZjpvkYpWr6kAdlyB0nYYq6tRH


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users