Jump to content


Photo
- - - - -

Your Experience With FWC Fiberglass Siding?


  • Please log in to reply
4 replies to this topic

#1 DBAshland

DBAshland

    Newbie

  • Members
  • Pip
  • 8 posts
  • LocationAshland, OR

Posted 08 October 2021 - 04:20 PM

We have a FWC Hawk Shell on order, and need to make decision on siding.  I understand the differences between corrugated aluminum and fiberglass in cost, appearance, repair costs, etc.  I'm interested in actual, real world experiences of those of you with fiberglass siding.  Have you had problems with scratches?  Dents and dings?  Warping and ripples? Ever need to repair?  If you were doing it over again, would you go with fiberglass or aluminum?


  • 0

#2 heinphoto

heinphoto

    Senior Member

  • Members
  • 166 posts
  • LocationSan Francisco Bay Area (East Bay)

Posted 08 October 2021 - 04:33 PM

I don't believe FWC actually uses fiberglass siding anymore.  The newer smooth siding options are also aluminum.  We have the smooth siding on our 2020 Grandby.  It will definitely show more "desert pinstripes" and dents than the "classic" corrugated siding.  However, after the first few scratches, we stopped worrying about them - they are usually superficial and just part of using the camper the way we do.  The corrugated siding is supposed to be easier to repair, but I haven't heard very many instances where repairs have actually been needed or done.  If I was doing it over again, I would probably go with the smooth again - I just like the appearance better.  However, from a purely functional standpoint, the corrugated is probably a more sensible choice.

 

-Scott


  • 1

FWC Slide-in Grandby and OEV Aluma Tray on a Ford F350 Supercab with the 6.2L Gas Engine.

http://www.heinphoto.com/

IG: heinphoto


#3 DBAshland

DBAshland

    Newbie

  • Members
  • Pip
  • 8 posts
  • LocationAshland, OR

Posted 08 October 2021 - 04:36 PM

Well, I just looked at FWC site again and apparently smooth fiberglass has been replaced with smooth aluminum.  Excuse my ignorance!  So revise my questions to pertaining to the smooth aluminum siding.


  • 0

#4 Jon R

Jon R

    Senior Member

  • Members
  • 906 posts
  • LocationWashington State

Posted 10 October 2021 - 11:17 PM

I wrestled with the same decision when we ordered our Grandby a year ago. I went with smooth white siding and we are very happy with it. Washing is a breeze, and because it’s smooth it’s easy to wax. It’s up high enough that it is well protected from damage other than from branches.
  • 0

Jon R

2021 Grandby Slide-in Front Dinette

2021 GMC 3500HD CC LB SRW Gas

1993 Chevrolet K2500 Ext Cab LB


#5 Jon R

Jon R

    Senior Member

  • Members
  • 906 posts
  • LocationWashington State

Posted 10 October 2021 - 11:20 PM

Photo of our truck and camper with smooth white siding

Attached Thumbnails

  • 63D29978-3519-4175-BDCF-8091E0FA8DA9.jpeg

  • 0

Jon R

2021 Grandby Slide-in Front Dinette

2021 GMC 3500HD CC LB SRW Gas

1993 Chevrolet K2500 Ext Cab LB





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users