It’s official, I’m on the list for a full size ATC Shell. It’s going to be Spartan on the inside, except for a furnace/stove, and a passenger side storage bench for batteries and some gear.
Yet another ATC on the way
Started by
Wandering Sagebrush
, Oct 19 2021 02:40 PM
34 replies to this topic
#1
Wandering Sagebrush
-
- Site Team
- 10,574 posts
Free Range Human
- LocationNortheast Oregon
Posted 19 October 2021 - 02:40 PM
I am haunted by waters
#2
ski3pin
-
- Site Team
- 15,315 posts
Belay On
- LocationSierra Nevada Range
Posted 19 October 2021 - 03:13 PM
Congrats Mr. Sage! 
2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln http://ski3pin.blogspot.com/
#3
jimjxsn
-
- Members
- 599 posts
Senior Member
- LocationRoxborough Park or Buena Vista CO
Posted 19 October 2021 - 06:12 PM
Sage, Congratulations! May the wait begin...
~Jim2000 Tundra AC- 2000 FWC Ranger
2017 Tundra DC - 2017 ATC Panther
#4
goinoregon
-
- Members
- 518 posts
Senior Member
- LocationPDX
Posted 19 October 2021 - 08:15 PM
good to hear. are you going to install furnace, etc. yourself ?
Oregon
#5
Wandering Sagebrush
-
- Site Team
- 10,574 posts
Free Range Human
- LocationNortheast Oregon
Posted 19 October 2021 - 09:22 PM
good to hear. are you going to install furnace, etc. yourself ?
ATC will do the install.
I am haunted by waters
#6
goinoregon
-
- Members
- 518 posts
Senior Member
- LocationPDX
Posted 20 October 2021 - 12:57 AM
thx WS. you would'nt happen to have a layout design?
i am thinking of doing something similar, but am having brain freeze on design.
Oregon
#7
Wandering Sagebrush
-
- Site Team
- 10,574 posts
Free Range Human
- LocationNortheast Oregon
Posted 20 October 2021 - 01:21 AM
thx WS. you would'nt happen to have a layout design?
i am thinking of doing something similar, but am having brain freeze on design.
The layout is floating around in Marty’s and my mind. I want the furnace with stove on top to sit in the driver side back corner, but not sure about the propane locker. Right now, I’m thinking in the driver side front corner. I also want a tee fitting in the propane line so I can add possibly add a catalytic heater if needed.
The bench will run down the passenger side towards the door, but leaving a a space to store the PortaPotti. I’m thinking 22” to 24” top surface, 2 segments, piano hinged the length, to store batteries and loose gear. Carpet on the top.
Location of the thermostat and USB/12VDC outlets near the front wall. I’m hoping to make the bed a NS layout.
Hope that helps!
I am haunted by waters
#8
goinoregon
-
- Members
- 518 posts
Senior Member
- LocationPDX
Posted 20 October 2021 - 02:01 AM
i went with the atc shell, and had them put what i think is their std propane door in. its on driver side, middle of camper. i am thinking, that a better place is in the back corner, so you can have the propane closer, more out of the way. with it in the middle, i figure i need to configure the shelves all the way out for the whole length of that side of the camper.
Oregon
#9
SunMan
-
- Members
- 2,362 posts
King Taco
- LocationOxnard, CA.
Posted 20 October 2021 - 02:26 AM
If you don’t mind, what is the latest wait time you were given? Almost afraid to ask.
Sunman2003 Four Wheel Camper -Hawk
2023 All Terrain Camper - Panther 2006 Toyota Tundra Double Cab Limited 4WD
2017 Toyota Tundra Double Cab Limited 4WD
#10
AWG_Pics
-
- Members
- 1,193 posts
Into the Great Empty
- LocationOregon
Posted 20 October 2021 - 02:57 AM
Never give up! Never surrender! Sounds like a great new travel-box Steve. Just the essentials.
lived for several years each in Montana, Utah, Idaho, Texas, Washington, Oregon.
2019 Tundra, Hawk.
https://www.flickr.c...hotos/awg_pics/
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
