Jump to content


Flippac for 1st Gen Tundra DC 6.5’ bed

Flippac pop up

  • Please log in to reply
No replies to this topic

#1 Stoney Creek

Stoney Creek


  • Members
  • Pip
  • 2 posts

Posted 05 May 2022 - 12:00 PM

Listing my Flippac that has been on my 06’ DC Tundra.


Fiberglass and windows in good shape. Tent is in good shape but screens are getting fragile for sure.


Sliding windows on both sides and front window work and latch properly. It is carpeted on the inside and has two interior lights that both work; I had them wired to a battery in the bed.


Original owner welded one of the torsion bar brackets; it must have broke prior to Sway-Away making replacements…I’ve used it for years without any issue. The top slants to one side a little but apparently that was an issue with most of them due to the torsion bar pulling one way. 

Width ~ 64.5”

Length ~ 77.75 - 78”


This would probably fit many other vehicles as the design makes them somewhat universal.


Asking $3,250


I’ll try to post files later, it’s telling me the files are too large…


located in SE Wyoming. 307-three two one-35 nine one 




  • 0

Also tagged with one or more of these keywords: Flippac, pop up

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users