Jump to content


Photo
- - - - -

LIft panels leaving marks on ceiling

FWC Lift Panels ATC

  • Please log in to reply
4 replies to this topic

#1 Vic Harder

Vic Harder

    Doctor Electric

  • Members
  • 4,201 posts
  • LocationCalgary, Alberta

Posted 01 June 2022 - 06:30 PM

Specifically, it is the rivets leaving round black marks on the ceiling cloth.  Is there supposed to be a backing on those to prevent that?  I will be taking the panels off to have a look see....

 

Vic


  • 0

2015 Silverado 3500 crew cab 8' bed Diesel

2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/

Power considerations thread - https://www.wanderth...e-power-scotty/

Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West


#2 Wandering Sagebrush

Wandering Sagebrush

    Free Range Human and Wrodent Wrangler

  • Site Team
  • 9,290 posts
  • LocationNortheast Oregon

Posted 01 June 2022 - 06:41 PM

Vic, I’m not aware of any backing, nor have I heard of this.  Assuming this is the front, chance you have extra bedding that is pushing the panels up?  Photos?


  • 0

Real Dogs Have Beards - Fear the Beard
Tu Ne Cede Malis


#3 SkyP

SkyP

    Senior Member

  • Members
  • 112 posts
  • LocationSouth Carolina

Posted 01 June 2022 - 06:50 PM

Aluminum pop rivits?  I could see that happening if they have any movement against the ceiling.  Which is probably likely.   MAybe some sort of adhesive mylar dots applied over each rivit assuming the smooth side is up????


  • 0

20 F150 4x4 18 ATC Panther

96 F350 4x4  99 FWC Grandby Shell (sold)

15 Aliner Scout

18 Camplite 16TBS


#4 ski3pin

ski3pin

    Belay On

  • Site Team
  • 14,097 posts
  • LocationSierra Nevada Range

Posted 01 June 2022 - 08:05 PM

I believe we have mild rivet marks on our ceiling from the lift panels after 9+ years, mainly over the bed area. I'll look and photograph the next time we lift the top at home.


  • 0

2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln  http://ski3pin.blogspot.com/


#5 BlueSky

BlueSky

    Senior Member

  • Members
  • 134 posts

Posted 06 June 2022 - 11:55 AM

The lift push bar thing leaves marks on the ceiling above the bed. Just about any metal will leave marks after a while, but aluminum is the worst. Wrap or cover in clear packing tape, problem solved.


  • 0





Also tagged with one or more of these keywords: FWC, Lift Panels, ATC

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users