Jump to content


Photo

2020 Grandby Shell, partially finished

fourwheel camper grandby popup

  • Please log in to reply
9 replies to this topic

#1 DonFleming

DonFleming

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 13 June 2022 - 10:00 PM

2020 Grandby Shell, in Maryland partially finished.
Only used 5-6 times for short local overnights.

UPDATE 12/22 : I have had two buyers commit to a purchase and then back out. Both decided the drive was too much. I really would like to sell this camper! So... if you are a traveler or even better an east coast roamer please check in.

Reid 301.606.8036
drf1900@gmail.com

content-folder_dropbox-large.png
2020 Grandby Camper
Shared with Dropbox
favicon-vfl8lUR9B.ico www.dropbox.com

I planned to use this for extended trips and started the build for rugged use. The events of the last couple years have forced me to change plans. I believe much of the work I have done is basic enough to incorporate into various layouts. As you can see in the pictures I used high quality materials. The plywood is exterior grade, high compression birch. It is coated with marine epoxy finish.


2020 Grandby Insert for 8 foot bed
Queen size upper bed. Couch-Twin bed below for family or quick rest stop overnight (Top Down)
Smooth Aluminum Siding / Gray-Tan
Mechanical Camper Jacks
Jack Brackets Aluminum Upgrade
2 Powered Roof Vent Fans
Yakima Tracks on the Roof
Driver’s Side Window
Full install package bolts and anchors package

Electrical
.
Complete Victron Multiplus, MPPT, Sterling charging package as pictured
2 100Amp BattleBorn lithium batteries. Well maintained with minimum cycles. (I can hold these back for a reduction in price)
BlueTooth phone app monitoring.
4 not yet installed hard shell solar panels
Extra wire and fuses for direct power install.
This setup will charge from solar, car alternator, or shore power.

Everything in close to new condition including windows, screens, canvas, roof, cushions. One crack in plexi slider over door lock. This is a solid long distance rig.
This package would cost $24,000 off the shelf now. This camper is in almost new condition.

Camper: $17,500 I will discount the 2 Battleborn batteries as I will use them in another project if not wanted here.

Location: Frederick, MD
drf1900@gmail.com

 

 

 

1.jpg 2.jpg 4.jpg 5.jpg 9.jpg


Edited by DonFleming, 26 December 2022 - 07:38 PM.

  • 0

#2 Wandering Sagebrush

Wandering Sagebrush

    Free Range Human

  • Site Team
  • 10,282 posts
  • LocationNortheast Oregon

Posted 13 June 2022 - 11:04 PM

Don I don’t see your photo link.


  • 0

Under the rocks are the words
Tu Ne Cede Malis


#3 korslite

korslite

    Advanced Member

  • Members
  • PipPipPip
  • 41 posts

Posted 14 June 2022 - 01:53 PM

This should go fast!


  • 0

#4 Wandering Sagebrush

Wandering Sagebrush

    Free Range Human

  • Site Team
  • 10,282 posts
  • LocationNortheast Oregon

Posted 16 June 2022 - 12:41 PM

Sorry. I work in TV production and had to jump on a plane. Can someone coach me on including some pictures. Thanks much.

 

Don, In the member support forum, there are several pinned threads that are helpful.

 

or

 

if needed,  send me a PM with your phone number, we can figure it out.


  • 0

Under the rocks are the words
Tu Ne Cede Malis


#5 DonFleming

DonFleming

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 30 July 2022 - 06:24 PM

Hi all. I just dropped the price a bit and added some more information. Please reach out with any questions. I know the market is moving these days so don't hesitate to reach out if you want to talk price.

 

Cheers all. Safe travels.

Reid


  • 0

#6 Vic Harder

Vic Harder

    Doctor Electric

  • Site Team
  • 4,714 posts
  • LocationCalgary, Alberta

Posted 30 July 2022 - 10:03 PM

Odd that this has not sold yet.  Really nice electrical gear and sweet install work.


  • 1

#7 DonFleming

DonFleming

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 01 August 2022 - 02:01 PM

@Vic  Thanks Vic.  Amazing how much thought it takes to keep things simple! I was focused on building a rig that would be equally happy  in a plug-in campsite in Mexico or a rest stop in Ohio or back road Alaska. I found buying a shell has been a lot of fun. I wish I could still go ahead with my plans.

 


  • 0

#8 goinoregon

goinoregon

    Senior Member

  • Members
  • 479 posts
  • LocationPDX

Posted 02 August 2022 - 02:23 AM

above your elec install, there is a metal plate with 3 bolts.  on both sides. what is this for?  thx


  • 0

Oregon


#9 Vic Harder

Vic Harder

    Doctor Electric

  • Site Team
  • 4,714 posts
  • LocationCalgary, Alberta

Posted 02 August 2022 - 04:23 PM

above your elec install, there is a metal plate with 3 bolts.  on both sides. what is this for?  thx

I have those too.  Those are the backing plates for the camper mounts.  


  • 0

#10 DonFleming

DonFleming

    Newbie

  • Members
  • Pip
  • 5 posts

Posted 26 December 2022 - 07:41 PM

Please take a look at my 2020 Grandby for sale. I have had two commitments fall through. Let me know if there is anything I can add to the info above.

Cheers all. Wishing all a Great New Year and Safe Travels
 
Reid

 


  • 0





Also tagged with one or more of these keywords: fourwheel camper, grandby, popup

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users