3 replies to this topic

[KLillie]

I'm about to get to work on mounting my Alu Cab 270 degree awning to my Bobcat and would like to see any pics of what others have done to mount a 270 awning on an ATC. Any issues you ran into, where you bolted it to, mounts you used, etc.... 

[Wandering Sagebrush]

I think this warrants a call to Marty, as Bobcats have clearance light wiring high on both sides.

[ctrippy]

I'm about to get to work on mounting my Alu Cab 270 degree awning to my Bobcat and would like to see any pics of what others have done to mount a 270 awning on an ATC. Any issues you ran into, where you bolted it to, mounts you used, etc.... 

https://dasmule.com/...ckets-pre_order

This will likely work on an ATC Bobcat and will be the least invasive. 

Edited by ctrippy, 13 September 2022 - 02:53 PM.

[Cpt Davenport]

This is what I did on my FWC. So far so good.

 

https://www.wanderth...wning-hardware/

 

 

 

 

Note my awning only ways 24lbs. Although the rivets are rated for around 600 lbs. I just did not want any through bolt hardware interfering with my bed slide on the interior.

Edited by Cpt Davenport, 13 September 2022 - 03:57 PM.