Jump to content


Photo
- - - - -

Where To Get a New Fresh Water Tank for Six-PAC T-100S?


  • Please log in to reply
5 replies to this topic

#1 foakes

foakes

    Member

  • Members
  • PipPip
  • 25 posts
  • LocationSierra Nevadas of California

Posted 22 November 2022 - 02:03 AM

We have a hard-sided SixPac T-100S camper that we bought new in 2002.

 

The fresh water has some tiny bits of plastic in it — looks to be the same type of poly-plastic as the tank is made out of.  So we are going to replace the tank and fittings.

 

The manufacturer is El Monte — Model # W126

 

measurements are 15” W, 16” L, 15” H.

 

Where can I get one of these?

 

Do I need to expect to drill the holes and seal for the fittings?  Supply line in, line to water pump, air line, and drain line?

 

the places I have looked at online don’t seem t9 have the correct tank.

 

Appreciate any help and direction.

 

 Always, Fred

Attached Thumbnails

  • 81212077-F279-43FA-B517-EBC82F003BA3.jpeg
  • 5A7B6957-2D41-40DB-8F76-115A2839751E.jpeg
  • 7417814D-4118-4A10-A5C2-E0400DF73668.jpeg

  • 0

#2 Vic Harder

Vic Harder

    Doctor Electric

  • Site Team
  • 4,948 posts
  • LocationCalgary, Alberta

Posted 22 November 2022 - 04:05 AM

There are places that make tanks in most any size.  I got mine in Canada, but the same must be true in the USA.  


  • 0

#3 Wandering Sagebrush

Wandering Sagebrush

    Free Range Human

  • Site Team
  • 10,575 posts
  • LocationNortheast Oregon

Posted 22 November 2022 - 01:49 PM

Fred, I suspect the builder may not have cleaned the tank before installing, especially true if they drilled any of the holes. You might be able to flush the tank, and reuse..


  • 0

I am haunted by waters


#4 Old Crow

Old Crow

    Searching....

  • Members
  • 1,059 posts
  • LocationSouth Central PA

Posted 22 November 2022 - 02:08 PM

   If you determine you do need a replacement tank, you might give Plastic-Mart a call.  I say this after reading the bottom section of their web page where they say they're an authorized dealer for El Monte Plastics tanks.  If they can't get one from El Monte, they may have a cross-reference to another manufacturer's tanks. And if they can't get a tank, they can make it. And they appear willing to deal with individuals.

 

Plastic-Mart web site

 

(Note: I've not dealt with them... I'm only reading their web site.  If you try them, please let us know how it went)

 

Also-- The tank should come with the molded-in portion of the fittings you see on your tank.  In other words, you'd add the elbows and flexible hose.  I don't see water-level sensors in your photos but can't see all the tank.  If you have those, you'd probably also need to drill holes for those sensors.  You might confirm that with Plastics-Mart.


  • 0

'01 FWC Hawk shell on a '13 Tundra Double-Cab  + '19 Ford Transit van with Quigley 4x4 option


#5 Mighty Dodge Ram

Mighty Dodge Ram

    Senior Member

  • Members
  • 1,003 posts
  • LocationClose to the edge...

Posted 22 November 2022 - 04:25 PM

You can also check out Valterra. Many sizes, configurations, and capacities. 


  • 0
Richard
1996 Dodge Ram 1500 4x4, lightly lifted, ARB bumper/Warn winch, BFG AT/KO2, Snugtop shell. SOLD! But not forgotten!
2002 Chevy 2500HD XC LB 6.0L 4X4, Leer Hi-Rise shell, completely stock...for now!

#6 foakes

foakes

    Member

  • Members
  • PipPip
  • 25 posts
  • LocationSierra Nevadas of California

Posted 22 November 2022 - 05:12 PM

All great suggestions.  Thanks everyone!

 

Will report back results.  Might take a few days with the holidays and places — some closed, some open.

 

Best, Fred


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users