Search results

I also have a Dometic 2193 3-way. Last year spiders made a nest in burner which reduced the efficiency so after watch the mechanic solve it with a compressor, it motivated me to get a compressor to blow them out. This year the issue is different. When lighting the unit it the gas lights for a...

Great Vic-- How did you mount it? I see only a single screw mount vs a panel mount.

After reading exhaustive posts re these thermostats, I'm going with the suggestions above, the non digital honeywell CT50K to avoid some of the issues others have had with digital thermostats. Our digital Emerson from ATC has been fine but we want to sleep at lower temps in the winter. I might...

Thanks so much but before I order this thermostat a few questions: 1. The specs for the thermostat you all are suggesting is 230V. Any issues with it being used on a 12V system? 2. I'm assuming it will wire the same with the two wires used for my existing 45F Emerson thermostat. 3. My Emerson...

We have an ATC Bobcat with an Emerson heat only thermostat for the heater (2wire). It only goes down to 45. Does anyone know of replacement thermostat that will go down to 35F?

We have an ATC bobcat and are looking into roof cargo baskets to attach on our yakima racks with roof sliders. Marty at ATC discouraged us from using our 27 lb thule cargo box b/c of possible damage to the seal on the pop up on wash board roads plus the extra lift required to pop up. So were...

I'm interested in the quikfire but not sure if the legs fold in and how compact it will be and how sturdy the firepan is. The website doesn't show too much detail. I'm looking for something lightweight and compatible. I've consider the ammo box fire pits and saw this one...

We have an AT gas can holder and we carry a 20 L nato gas can. They sell two different types of straps for Nato or Scepter cans. Does anyone know if there is a water jug that works a Nato strap/system. The Scepter can doesn't work with the nato strap. Also when carrying extra gas I've been...

We have a dometic 2193- 3 way and piezo igniter is giving out. Is it best to replace the igniter and wire or just piezo which are cheap. Seems like a hassle to get it from dometic, so has anyone just gotten one from Amazon? piezo igniter 292.3024.20B as listed in parts manual.

We have a 4-day White Rim bike trip and the only vehicle we can bring for a SAG wagon is our Nissan Frontier with an ATC Bobcat. We’re debating whether to keep the camper on it or take it off for the first time. It’s 100 miles of 4x4 in late October with 4 bike riders and 1 driver. The pros for...

My plastic one got stiff because it was dirty from road dust. I removed it and cleaned it by soaking brushing with an artist brush and now the valve turns better. I'm thinking about applying some silicon grease (better for plastic) but maybe it will attract more dirt?? I'm going to try a cork in...

An RV mechanic checked it out and he blew out the chimney with a compressor/high pressure hose (more than what's in a can). Small white spider nests came out. It still worked poorly for a week and then it started working like it did when it was new (back 32 F or lower). So spider nests were the...

Follow up-- One of the wires was loose on the battery. A reminder that it is often the simplest solution. Should have checked it first.

We have a Renology Solar Controller. I've never noticed this before but it now seems to click a lot (every 10 seconds) especially in the morning and evening. My thought is this is when the sun is barely charging the system. Is this normal?

Marty suggested using a hair dryer and I did and it is working to "train the material" into the correct spot. There is some abrasion on the pinched material so it seems to be worth the effort.

Thanks I'm going to leave it to the experts. Of course any certified Dometic dealer is booked until the fal--onse said Decemberl. So I'm working with a smaller RV mechanic in a few weeks who thinks the issue is with the cooling fins inside the fridge. Maybe its what 57Pan said a vapor lock from...

Thanks we don't have a fan.

Oh yeah the bungees are tight and I've even tried using river cam straps to tighten more to pull the material inward and it didn't help. Also this pinching is only over a 1-2' section on the front left and right of the camper. I'll call Marty and see what he suggests.

RE a photo of the pinching that ski3pin asked for. Mine looks exactly like jimjxsn's photo. You can see where the material is starting to wear where it rubs on the unpopped roof.

1 yr old Dometic Refrigerator 3 way Model 2193 cooling problems. We’re having some cooling issues on 120V and propane: This spring there were some odd smells coming from the inside the camper and possibly from the fridge area but no sign of any leakages. 120 volt (shore powered): Seems to cool...

We have a bobcat and the gray PVC material is getting pinched at the seal when popping down. We're using flexible plastic buddy knives to tuck this material in these spots mostly towards the front. However, I'm wondering if we could use an iron (on low heat) to reshape this material so it less...

I took the above recommendations and bought an 80/20 rack with brackets and vertical rails from saltmade.co With the small cataraft frame on the vehicle it sticks out 10-3/4" from side of the truck with a total vehicle width of 7'-1/2". So it seems legal and solid. The only issue we'll have to...

I just bought the On Stage Power Crank-up SS8800B+ speaker stand from Amazon. It arrived with a torn box and no instructions inside. Most concerning is that every 6" while cranking or using the drill it has a momentary place of resistance. It might be getting slightly better each up/down but...

I just bought the On Stage Power Crank-up SS8800B+ speaker stand from Amazon. It arrived with a torn box and no instructions inside. Most concerning is that every 6" while cranking or using the drill it has a momentary place of resistance. It might be getting slightly better each up/down but...

Did you sell it? We'd buy it if not.