Search results

Thanks, I'll check that

What is the height of this?

Thanks guys. Having two WTW pro's like you guy's helps. Next plan is to raise up the panel with a spacer to take the stress off the connector and see what happens. After that I will try that connector you showed, Thom. I'll let you know. Thanks for the reply.

Hi guys, been a while. We just got back from a 9 day trip in Northern AZ. Hadn't had the camper out in a while. Having an issue with my solar wiring. I originally had the FWC 85 watt on the roof. Removed it and installed two 9 amp 160 watters on the roof along with trimetric charge controller...

We have a hot water heater. And yes, we do take hot showers outside. To us it makes a big difference. We were just out for 9 days and we took one hot shower half way thru. Makes us feel human again. I wouldn't be without.

Phil, Sorry it took me so long to answer. Been traveling. Regarding space from rear cabinet board to water tank...if you are talking about the board that I cut the sight gage in, then, it is about 1/4 inch when the tank is empty, but when it is full it is zero. You could cuts slots in the left...

According this chart in my PWM controller manual, 12 gauge is not recommended. I figured that my run is about 22 feet.

I have two 160's on the roof and an 85 portable that I installed legs onto, allowing it to tilt at about a 45 degree angle. Sorry I don't have some actual data to share, but I think that little 85 watt tilted placed directly towards the sun can put out as much as my two 160's that lie flat...

Glad it helped!

I filled it this AM. Drove the truck around town awhile with a paper towel underneath all the fittings. Dry as bone for a few hours now. If this happens again, I will use the same tubing that Vic used.

Update... Today I went to my local RV dealer and purchased a new nipple. The hose size I am using is the correct size. The next size smaller will in no way go onto the nipple. I talked to the mechanic there, and he said the best way to prevent leaks at this fitting is to, 1) double clamp it...

Vic, is your hose similar to this?

Might try a new nipple also

Well, it looks like it is the same size as the original. It is not that hard to slide on, though. I could try a smaller size. It leaked badly during filling, although since I got the new hose I got it to slow considerably. And yes the fill line IS full after I am done filling. So, I could let a...

Well, my tank is leaking again. I have the camper all torn apart again to find the leak. It is leaking at the point where the fill line attaches to the grey plastic reverse barb nipple that screws into the tank. I bought a new green spiral water fill line from a local RV store and replaced the...

Yes, it is the stick-on

Shouldn't be any more of a breakage problem than with the other mirror. I had a mirror store cut it to size for me ...20" X 17" It feels like we have another room now!

$20 for mirror $23 for tape and adhesive!

You said you've had your camper for 10 months. Is that the age of the camper? Just curious.

http://www.wanderthewest.com/forum/topic/13818-water-tank-leak/

Thanks for the info Stan. As usual, FWC customer service is the best!

I store mine inside and up to keep things aired out. Also, store your camper with the water tank empty. I used to store mine full with a capful of bleach. A slow leak occurred and did some damage. All fixed now.

Anybody out there have an IOTA IDP-30 distribution panel? Mine is in a 2012 Raven. It has 12 fuse slots in one row, with number 9 empty. It came from FWC without any labeling as to what fuse is what. I called FWC to get that info and they cannot find anything about it. Don't know if they just...

Thanks guys, I'll check those out.