fender

My fender nearly fell off. The manufacturer cut out the structure of the fender, creating a stress riser. This stress riser created cracks in my fenders, due to fatigue. Also, the weak supporting angle broke apart due to fatigue. Has anyone else had this problem? If so, how did you fix it...

We had a tire blow out on the highway and took off the fender. Looking for a good source to buy a new fender. 2017 Hummingbird. I got a quote from an authorized Jaco dealer for $795. included the lights. We don't drive at night so don't need that feature. Any good companies out there? thanks

My 2000 Hawk is on the dolly and I just finished resealing and painting the wood base. Next step is to repair a hole on the front of the camper where the aluminum has rubbed against the bed creating a small hole. Next step is to repair the hole as well as fill a couple leftover holes from...

I am replacing a fender skirt due to a tire blow out. Upon reviewing the undamaged side, I see there is a small bracket on each end of the skirt going up to the floor. Are these required on both sides of the camper? Did my tire blow out tear off both of these brackets along with my fender? If I...

Like many, we suffered a Westlake blowout that took out our skirting from the front door to the 110 outlet and the fender on the passenger side of our travel trailer. Looking at the parts page, I see a couple of different options for the skirting but, do not see a section that is ~ 14" x 88"...

Newbie to travel trailers :). Question: we bought a used 2013 Jayco Jayfeather Ultralite x19H, but can’t seem to get the right measurements for new fenders, :eek: Exhausting today, and chatted with online reps. The camper didn’t come with fenders, but can see where fenders were, clueless...

:( I can find fender skirt for my Eagle 325bh but can't find fender or whatever the part is that fender skirt attaches to. Any suggestions would be helpful.

We have a 2016 Sunset Trails GR, 32RL with a small crack in the bolt/screw on fender I would like to repair. Can anyone recommend a product to use and if I am dealing with plastic or fiberglass? I like the JB Weld products. Any other options that have worked well? Thanks

I've seen other posts listing replacing screws which hold the rear fenders on Seneca MHs, however haven't seen any solution to the problem. Seems every trip I have a broken screw and/or a fender flapping in the breeze. I usually have to move the bracket because the holes are wallowed out or...

Blew a tire and broke the skirt over the tire well. Anyone know best place to buy replacement skirt? I found some that are listed as "polar white" but my RV is more of an off-white color - so I'm afraid polar white will look bad. Attaching a pic of the good side (skirt intact). Thanks!

I noticed that my street side fender was loose so I crawled underneath the slide to see what could be causing it. I found a support bracket was loose due to a broken screw. This is the second time I've found one of these brackets in this condition. I'm not sure what the cause of failure was...