screws

Head of these screws sheared off and were sitting in the molding at the bottom of the slide

Hi all. I own a 2005 Flagstaff 206ST. It’s got straps mounted to the interior ceiling that hold the full size door up during travel. The straps are coming loose because the screws seem to be too short. I think they are only through the aluminum paneling, not actually secured into the wood of...

Hello everyone! We bought a 2022 Volante 32FB and it did not come with any TVs installed. There are stickers on the exterior wall for the master bedroom and one above the fireplace for the living room. I watched a video of a suffering owner of a 2021 32FB that assumed the sticker above the...

I'm about to remount the original 1" aluminum tubing roof rack that came with my 2001 Grandby. I had to repair it after the original owner apparently snagged a tree limb. (Embarrassingly, I am that original owner <sigh>.) Is there a functional difference between using self-piercing (sharp...

Purchased a low milage 2017 Greyhawk MV29. Unfortunately, we missed the soft floor in the bathroom. Slides and plumbing look Okay, so I think the root cause was likely a toilet over-flow. Everything is presently dry, and the major damage is above the rear wheel liner. I have a plan of the...

I have a 2021 zinger18RK and my couch and cabinet above the dinette has loose screws coming out of the wall. Has anyone dealt with this? How do I fix it?

Been lurking for a few months, finally decided to post! My wife and I were gifted a 2002 Thomas Built Saf-T-Liner by my parents who bought it to do a conversion but never got around to it. We've removed the rubber flooring, and started removing the side walls and ceiling. We live in Indiana but...

How to install backers so the screws have grip for the rear rail, rear cap and rear fenders. There is a two step process to securing the back cap. Yesterday, I secured the rails to the rear cap and fender. I still need to secure the rear wall, which I will later post. I believe both fixes are...

I am a new TT owner and fairly competent on home repair. I am not sure on TT issues. I have a new 2020 28BHS, took it out for maiden voyage this past week. Had trouble with the small latch that attaches to screen door to the main door and disengages the latch on the screen door. So the screen...

I am currently attempting to gut my bus; however, the 30 year old panels, attached with screws, are giving me a lot of trouble. I can get about a third of them out with my impact driver, but the rest won't budge and end up just stripping out. I am thinking maybe an angle grinder can just cut...

We noticed the trim is lifted on our left rear roof seal. Looks like a screw or two needs replacement and new caulk. We already know not to use silicone so plan to buy something like Dicor 501LSW-1 Self-Leveling Lap Sealant. The question is are we missing a piece of insert/molding? First time...

HELP!! how did you secure your floor? The specialized Tek screws from brafasco are not working. My flooring layers are as follows: 1)new custom sheet metal on the holey sheet metal floor (secured with PL) 2)a layer of tar paper, 3)1/2 inch durafoam insulation 4) 5/8 inch pressure treated...

Working it's way up through the faux wood covering. Before screwing it back down, any suggestions or past history on how to patch this small hole that it will create?

I've seen other posts listing replacing screws which hold the rear fenders on Seneca MHs, however haven't seen any solution to the problem. Seems every trip I have a broken screw and/or a fender flapping in the breeze. I usually have to move the bracket because the holes are wallowed out or...

While closing up the slides in preparation for TS Gordon, I noticed that the lower two screws on the black metal covers on either side of the kitchen slide were backed out and loose. I tried screwing them back in, only to find that they are not Phillips, T-15 or T-20 Torx. I have no idea what...

Hello WTW Members, I am new to the community and looking to other FWC owners for help in proper repairs, maintenance, and up keep...Unfortunately, I have reached out to my local dealer and the FWC company in California but have not received complete information of what I need for repairs...

First of all, sorry for posting if this has been answered before. I'm at the bus all day and can only access through mobile. I'm having a hard time searching the site. We're working on pulling up the floor now. The rubber is coming up relatively easy, but we're having trouble with the plywood...

I scoured the forum looking for an answer to my "elementary" question, but not able to find it. Probably not looking hard enough. I want to mount outdoor speakers to the frame on the curb side. The mounts use thin metal, and I am curious what the best method is to attach to the frame, such...

Hey all, I have a great little wall mounted cabinet that will fit perfectly right on the right side of the camper next to the window (close to the door, under the FWC factory storage already there). But I'm looking for some advice on drilling to put in a couple screws to mount it. What's...

Hello, does anyone know what tool is used for the exterior self tapping screws on 2015 Raptor? I thought is was a T-20 Torx but nothing fits. Any help appreciated.

Hello friends, my name is Jamie, I'm new to the board and have recently purchased a 1986 International 72 passenger bus with the inside already stripped down and sealed with rustolem. Now the fun begins! Since I plan on avoiding traditional construction items like plywood, I'm hoping to get...

I had arrived at the campground and was in the process of "setting-up". We pushed the switch to move the bedroom slide "out". It went out and stopped so that the foot of the bed was about 6" from the cupboard. Long story short...... discovered the screws that hold the bed "down" to the floor...

The larger storage bin on our 2011 265RL Laredo has just come apart? I dont know what mental giant at Keystone thought that the little screws they installed on the gas hinges was going to work? Bin on the other side still has a standard lift and hook set up. Went back to my selling dealer and...