Cleaning behind the lifting panel

[Helmut]

Is there a trick on how to clean the vinyl behind the lifting panels from the inside?
I am thankful for any tips.
It’s all black behind there

Helmut

 

[Wandering Sagebrush]

Be careful to not separate the vinyl from the rivets. Try bringing the top down a little, then blocking the top to keep it from coming down all the way. That might give a bit of room to clean.

 

[Helmut]

Be careful to not separate the vinyl from the rivets. Try bringing the top down a little, then blocking the top to keep it from coming down all the way. That might give a bit of room to clean.

That’s what I’m fighting with at the moment. The cabover section is somehow accessible that way, but over the entry, no way.

 

[Vic Harder]

Black? As in, mold?

 

[Helmut]

I guess so. "ALL" was maybe a bit exaggerated.

 

[jkszoo]

I wondered about that too as I was wiping the inside after camping in the cold and using the heater. Had vents open to reduce moisture build up inside but still had to wipe down.