Lithium battery connection?

dennis 221

Senior Member
Joined
Oct 11, 2019
Messages
427
So Zero Declination did my upgrade. My ? Trucks in shop an their says they need to get into my fuze box which means they will disconnect my system. What do I need to do after all it's reconnect to my truck...??? Or will it just reconnect by itself?
 
It should all just work when reconnected. Check all systems though. You can never be sure that "touching" these systems won't affect something, especially if you are not the person doing the "touching"... First rule of troubleshooting:
1) if the user/owner says "Nuthin'" in response to the question: "What did you change" then check everything.
 
Just a follow up..so it's seens to have reconnected according to my phone... however we found my problem to no marker lights not working...#1 green wire installed at time of purchase had rubbed against frame an had bare wire hitting metal..so we put new wire an incased it a plastic cable wrap.an number # 2 connecter to the green wire to camper was disconnected, so I guess that connecter needs to be checked if u don't have running lights. An gee i thought Anderson plugs where supposed to be the best..oh well lesson learned ...
 
Just a follow up..so it's seens to have reconnected according to my phone... however we found my problem to no marker lights not working...#1 green wire installed at time of purchase had rubbed against frame an had bare wire hitting metal..so we put new wire an incased it a plastic cable wrap.an number # 2 connecter to the green wire to camper was disconnected, so I guess that connecter needs to be checked if u don't have running lights. An gee i thought Anderson plugs where supposed to be the best..oh well lesson learned ...
Can you please describe where you had the wire chafing issue? Others may want to inspect that area if it’s a factory installed part of the wiring. Thanks
 
Yep one connected for wires from engine one from 7 pin trailer connection so 2 plugs into camper
 
My green wire was picked up from the rear lights. When I went with Anderson connection I just used something like a barrel connection or male/female spade for the green wire and taped the heck out of it to seal from elements. If ever need to remove camper I can just pull apart the Anderson and the green wire connection, easy enough.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom