Jump to content


Photo

Folding Counter Top Extension


  • Please log in to reply
9 replies to this topic

#1 PackRat

PackRat

    Senior Member

  • Members
  • 680 posts
  • LocationNovato, CA

Posted 07 November 2018 - 01:01 AM

Anyone have any pics of one of those fold-down panels screwed to the side of the sink cabinet that can be locked in the UP position for meal prep, etc. and folded down for dining and to set up the dinette into a berth? Kinda like the locking thing for folding tables I guess...

 

I wonder if it would need TWO locking supports or if one would do? I could get some trim similar to what the rest of the cabinetry has and a piano hinge I guess but any pointers and some pics would be helpful.

 

TIA!


  • 0

1988 Ford F-250 HD Lariat 4x4 8 Ft. bed

1976 Alaskan 8 Ft. CO camper


#2 popRoid

popRoid

    Advanced Member

  • Members
  • PipPipPip
  • 64 posts
  • LocationSouth Carolina

Posted 07 November 2018 - 01:37 AM

Best idea I have and it might not be what you are looking for is:   https://www.rv-table-mount.com

 

We used this Lagun table hardware on our 10ft Alaskan and you can make the table out of anything you want.  All the best.


  • 0

2018 10' Alaskan Cabover/2017 Ford  F350 Dually Diesel


#3 thisoldcamper

thisoldcamper

    Senior Member

  • Members
  • 167 posts
  • LocationIrmo, SC

Posted 07 November 2018 - 11:22 AM

Here's a picture from an Airstream that I was fixing up (it's gone now). It used two brackets that locked in the up position putting the extension flush with the countertop.

 

Attached Thumbnails

  • AS_kitchen.JPG

  • 0

#4 PackRat

PackRat

    Senior Member

  • Members
  • 680 posts
  • LocationNovato, CA

Posted 08 November 2018 - 12:42 AM

I'm going to try to find a fold-down like the one in the RV picture....thanks guys....worst case is I have to make one up but I have seen them in Alaskans before I think and they were factory items I believe.


  • 0

1988 Ford F-250 HD Lariat 4x4 8 Ft. bed

1976 Alaskan 8 Ft. CO camper


#5 Igottasail

Igottasail

    Member

  • Members
  • PipPip
  • 11 posts

Posted 14 November 2018 - 05:01 AM

IMG_4225.JPG one leg will do.
  • 0

#6 PackRat

PackRat

    Senior Member

  • Members
  • 680 posts
  • LocationNovato, CA

Posted 14 November 2018 - 08:25 PM

Sailor.... was your fold-down extension a factory item or did you or a PO make it up? I see yours does not go too far back towards the wall and I assume if it did, it would make swapping the dinette cushions to the bed cushions much more difficult. Am I correct on any of this please?

 

Yours looks REALLY nice by the way, just enough added space to make a food prep area a bit larger!

 

Thanks!


  • 0

1988 Ford F-250 HD Lariat 4x4 8 Ft. bed

1976 Alaskan 8 Ft. CO camper


#7 Igottasail

Igottasail

    Member

  • Members
  • PipPip
  • 11 posts

Posted 20 November 2018 - 05:28 AM

I don’t know I bought my camper used. Yet the person I bought it said everything was original. All the countertops match. I also found a smaller table that fits where the big table goes.
  • 0

#8 Igottasail

Igottasail

    Member

  • Members
  • PipPip
  • 11 posts

Posted 20 November 2018 - 05:31 AM

You are correct on the cushions. I have to raise the table up to slide cushions out can be a bummer but it works. I thought about making the cushions different sizes yet that might be a challenge in itself.
  • 0

#9 PackRat

PackRat

    Senior Member

  • Members
  • 680 posts
  • LocationNovato, CA

Posted 20 November 2018 - 05:41 PM

I think the added counter top area is well worth the extra bit of effort in moving the cushions around to get by the extension. It does require some extra effort twice a day but from my own experience, the only alternative is the inset counter top that fits into the sink or just doing meal prep right at the table. That was how we did it in my old Alaskan; at the table.... as I did not have the sink cover piece.


  • 0

1988 Ford F-250 HD Lariat 4x4 8 Ft. bed

1976 Alaskan 8 Ft. CO camper


#10 fesser

fesser

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationNapa, CA

Posted 31 May 2019 - 04:42 PM

I know this is an older post but I just stumbled across it.  My 10' NCO project has a folding extension similar to Igottasail's except that mine has all square corners.  Can't say if it is stock but the countertop material matches the rest of the cabinets. 

C516F40A-8955-4484-90FC-AA59D64EA377.jpg

 

89903C35-C824-47C2-BF3C-B7AB635771B5.jpg

 

794E1C14-7312-4220-BFDD-FE7A79AFE3D1.jpg


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users