I added a small seat in the camper and need a 4" thick cushion approximately 15x22. Anyone know of a source to get cushions? I found some custom cushion places, but I'm not interested in a $50 or $100 cushion. There must be another way. Sam found some foam that looks great for a seat cushion in the other thread, but we don't sew, so I'm really looking for a good selection of cushions (and I didn't want to hijack his thread). Any suggestions?
Source for Cushions?
Started by
brett13
, Mar 30 2008 03:44 PM
3 replies to this topic
#1
Posted 30 March 2008 - 03:44 PM
Once had 2007 Tundra TRD 4x4 5.7 SR5 w/ Firestone bags, Bilstein 5100s in front, Total Chaos shackles rear, 275/70/18 E rated Michelin LTX AT2
2007 ATC Bobcat for sale
Now, just roaming around in a stock Land Cruiser (not stock for long though... bawahahha [evil laugh])
Now, just roaming around in a stock Land Cruiser (not stock for long though... bawahahha [evil laugh])
#2
Posted 30 March 2008 - 08:50 PM
Hi brett13,
did you look for the seat cushions on eBay?
I found these:
http://stores.ebay.c...ons_W0QQfsubZ18
They are for wheelchairs but the size is more or less what you might need.
Not that I would compare your truck and camper to a wheelchair, it's more like a house on wheels. But I guess if these cushions are good for somebody spending maybe 14 or 16 hours sitting on them, they should be quite good for a camper.
The prices are not too bad either.
If you want to do the cushions yourself, without a sewing machine, it's not too difficult. Take a 1/4 or 1/2" plywood, foam in the same size and a staple gun. I guess you can figure the rest.
Have fun.
did you look for the seat cushions on eBay?
I found these:
http://stores.ebay.c...ons_W0QQfsubZ18
They are for wheelchairs but the size is more or less what you might need.
Not that I would compare your truck and camper to a wheelchair, it's more like a house on wheels. But I guess if these cushions are good for somebody spending maybe 14 or 16 hours sitting on them, they should be quite good for a camper.
The prices are not too bad either.
If you want to do the cushions yourself, without a sewing machine, it's not too difficult. Take a 1/4 or 1/2" plywood, foam in the same size and a staple gun. I guess you can figure the rest.
Have fun.
03 Toyota Tacoma TRD 4x4, D Cab, Air-Lift, Schroth Safety Harness, Recaro Seat (finally) on board laptop w GPS, ARB Front Bumper, Manual Hubs.
#3
Posted 01 April 2008 - 04:50 PM
Thanks Cabazon23. I hadn't thought of ebay. Oh, why didn't I think of ebay? You can find anything there.
Once had 2007 Tundra TRD 4x4 5.7 SR5 w/ Firestone bags, Bilstein 5100s in front, Total Chaos shackles rear, 275/70/18 E rated Michelin LTX AT2
2007 ATC Bobcat for sale
Now, just roaming around in a stock Land Cruiser (not stock for long though... bawahahha [evil laugh])
Now, just roaming around in a stock Land Cruiser (not stock for long though... bawahahha [evil laugh])
#4
Posted 06 April 2008 - 07:30 PM
Brett I made seats for my boat and picked up the cushions at Beverly's fabric store. they have 1,2,4 inch thick foam price was not to bad $20.00 for 1.5 by 5 ft + or - a buck or two
05 Ford F250 LB V10 04 FWC Grandby
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users