4 replies to this topic

[kifo4173]

Before Expo West, Anne and I have decided to offer our rig for sale on the forum. I worked meticulously with the guys over at AT Overland in building this rig. They can certainly testify that I was extremely detail-oriented during the build. Every decision, part, and design aspect was carefully thought out and analyzed. Decisions were made based on functionality, quality, purpose, and aesthetics.

 

Please feel free to contact me with questions. Those who have completely spec'd a rig will appreciate the time, effort, and cost of sorting a rig this carefully; the rig is priced correctly, and I have no doubt it will move at the expo. I am, however, willing to move it before. It's hard for me to part with the rig, but I'm entering a different stage of my life and would like to see the rig go to someone who can use it to its full potential. 

 

Price Drop $79,000. Cost to build was $99,500. 

 

*These rarely come up for sale, and I have a feeling buyers who know what they want will jump on it. I will honor order of contact, but do reach out right away if interested!*

 

Please see the following article by Chris Cordes on ExpeditionPortal for more information and photographs of the truck. https://expeditionpo...flatbed-tacoma/

 

The basics

2016 FWC Fleet Flatbed model

2015 Tacoma TRD offroad 4x4 v6, manual 6-speed, 32k miles

2016 Alumline custom design flatbed 

 

2016 Four Wheel Camper Fleet Flatbed 

This is the camper that is the first image on the fleet flatbed page on the FWC site. Fully optioned:

130 L fridge

Furnace

Flush-mount appliances

Self-contained (inside shower, hot water, cassette toilet)

8' side awning

Yakima complete rack

Flood lights (had moved to side, now FWC specs them this way)

Two 6v sealed AGM batteries (225 aH storage)

Accordion scissor entry steps

160w solar

 

**ADDITIONS BEYOND FACTORY:

2x 100-W Carmanah flexible solar panels (total 360w)

Custom welded aluminum rear rack, maxtrax, fuel/water containers

Plastic welded greywater tank, T-valve, self-contained greywater approx. 8 gallons 

 

 

2015 Tacoma Tacoma TRD Offroad v6 4x4: Selected over 2016 for low-end torque. Manual selected for better power band control. 

 

Premium package on truck

6 speed manual transmission

Mickey Thompson Classic wheels, 5

BFG 285 AT's, 5

OME 2" heavy duty suspension kit, additional 4 leaf springs custom spec'd for load

Air Lift ride control kit

ARB Deluxe bar front bumper

SEAL Gen 2 9.5s WINCH, synthetic line

Custom welded steel rear bumper

Backup camera

 

Custom Alumline Aluminum Truck Flat Bed

Headache rack

1" extruded aluminum floor, integral I beam 4"

Underbody toolboxes, custom tapered to 'build' wheel-wells 

Sharkhide protectant/sealer/finish

Custom stop/tail/turn lights, LED

 

 

It is my hope that I can forge a relationship with the buyer, and keep in touch about their adventures. This build took 6 months, and an immeasurable amount of time and thought. It has brought us to some amazing areas, never let us down, and is in absolutely impeccable shape. 

Edited by kifo4173, 14 May 2017 - 04:52 PM.

[kifo4173]

Quite a few showings set up for Expo West; please let me know if you'd like to set up a showing!

 

I've told interested parties in the last week-if someone wants to take a run before the expo I'm a bit more open to entertain offers a bit below my asking price. Please PM me with any serious inquiries. 

 

Thanks,

Kipp

[kifo4173]

PRICE DROP: $79,000 looking to move this in the next few weeks. I'll be at Expo West; please text me if you'd like to see the rig. 

Edited by kifo4173, 14 May 2017 - 04:38 PM.

[kifo4173]

SOLD at 1pm on Saturday at the FWC booth at the Expo. 

 

Sold at asking price, with 2 or 3 parties interested to see if the sale fell through. Nearly 100 flyers were taken. I was a bit surprised the combo didn't get more attention on the forums. Definitely some interest/requests for showings, but a part of me thought it would sell in a day or two. I think the package price deters potential buyers. However, at the show everyone goes and talks to AT Overland and Mainline and once they add up the components and are over $100k, this was seen as a pretty incredible/rare deal. 

 

Going to leave the post up here for reference, as I have often trolled old sale threads to get a ballpark for what rigs sell for. If you're in the market for a FWC flatbed rig know this-building one will cost you WAY more than you anticipate. A fully optioned slide in Fleet, a new Tacoma, a spring pack, and bumper will run you over $70k-I think so few recognize this until they actually follow the road to completion! 

 

I can't say enough good things about the flatbed model. If anyone is building one and wants help or reference, I really focused on the details of my rig and am more than happy to help. Please shoot me a PM. 

 

**Also can't say enough good things about Mario/AT Overland and Matt/Mainline Overland. Phenomenal people to work with-smart, honest, straightforward-if I ever build another rig I wouldn't go anywhere else. Also want to give a plug for FWC, in case any potential buyers are on the fence-they welcomed me to the family and were always responsive/helpful with any questions I had. Friendly and easy to work with-you're working with individuals who will give you the attention needed to solve a problem-this showed a lot to me, even as the business is expanding.**

 

 

-Kipp

Edited by kifo4173, 15 May 2017 - 03:44 AM.

[W6USA]

Congrats on the sale!  I saw it at the show...very impressive.

 

Good idea on leaving this post up for reference!