Jump to content


Photo
- - - - -

Help! Refer is not staying lit (propane)


  • Please log in to reply
3 replies to this topic

#1 AK Nomad

AK Nomad

    Senior Member

  • Members
  • 112 posts
  • LocationAlaska

Posted 21 July 2010 - 09:35 PM

I'm trying to search the forums, but not finding what I need yet - thought I'd ask the question here. My refer pilot keeps going out. Was working fine in June, but having trouble keeping it lit now while vacationing. It will light and stay on for a while (not sure just how long yet) but when I check on it a couple of hours or so later, the flame is out. I have plenty of propane, and everything else (stove, hot water) is working fine. I did just change the regulator (constant smell - thinking I had a bad regulator), so there's a possibility that the new one could be faulty? Anything simple I could look for? I'll check this board again when I stop somewhere with internet access. Thanks.
  • 0

#2 chnlisle

chnlisle

    Post Master

  • Members
  • 3,811 posts
  • LocationThe Old Pueblo

Posted 21 July 2010 - 09:44 PM

http://www.wanderthe...__fromsearch__1
  • 0

Special Engel Pricing For WTW Members

Click here to see my ATC Cougar
JayAronowSales.com
(520)579-9610
jayaronow@gmail.com


#3 leadsled9

leadsled9

    Senior Member

  • Members
  • 935 posts
  • LocationLivermore, CA

Posted 22 July 2010 - 03:44 AM

I had the same problem last year. Follow the instructions in the following post and clean the slits in the tube. It works great now.

http://www.wanderthe...?showtopic=1421
  • 0

2010 Ford F250 4X4; 6.4 Powerstroke Diesel; Warn 16.5 winch; Airlift Springs; Transfer Flow 47 gal. fuel tank, BDS 4" lift kit, BDS dual steering stabilizer with upgraded Fox 2.0 shocks, Toyo 35X12.50X18 Open Country M/T tires, Pro Comp wheels;  2008 FWC Hawk Camper;  2000 Toyota Tundra.


#4 AK Nomad

AK Nomad

    Senior Member

  • Members
  • 112 posts
  • LocationAlaska

Posted 09 August 2010 - 05:48 AM

Back home now after 7500 mile trip.

I ended up taking the orifice out and soaking in alcohol per instructions. Also cleaned the slots in the burner with a wire brush. Put everything back together and it only went out once after that. Otherwise fine for the rest of the trip.
  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users