K7MDL

About Latest activity Postings

  • Loading…
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      I stared at the wiring some more which equals more problem solving. Having to throttle down the DC charging rate from the truck (and...
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      I plugged in the DC-DC charger to the camper 12V bus, connected a 50Ah LiFe battery and high power radio/amp for load on that LiFe...
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      I have a 50Ah LiFe battery here. I will run my DC-DC charger set for 10A and 20A rates on the Iota output and observe what happens. I...
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      Agree. I solve that problem by configuring the max output to 20A. Not all DC-DC chargers will do that though.
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      This afternoon I was trying to look at the battery/solar side wiring in my 2022 Hawk inside the cabinet. With the right tool it looks...
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      Yes, Replace DC Charger with DC-DC charger, not to be confused wit the Iota which is a DC charger :-).
    • K7MDL
      K7MDL replied to the thread Disconnecting Iota charger.
      Edit: Changed DC Charger to DC-DC Charger for clarity. The Iota is an AC to DC charger. When I get around to putting my DC-DC charger...
    • K7MDL
      Some pictures or it did not happen! MoFi unit is on the floor for now, it gets moved around, until I decide the best place to mount and...
      • 20240713_162253.jpg
      • 20240713_162411.jpg
      • 20240713_162758.jpg
      • 20240713_162429.jpg
    • K7MDL
      I am converting to LiFEPO4 battery or batteries over time in phases. Many have tread this path before here and have enjoyed reading the...
    • K7MDL
      K7MDL replied to the thread Random FWC Photos.
      2M yagi, 2M and 6M loop antennas. One handed pull on a cord to raises the yagi to 6ft. The 2ft leverage arm pins in place and easily...
      • 20240528_135038.jpg
      • 20240530_153948.jpg
    • K7MDL
      K7MDL replied to the thread 2006 FWC Electrical Issue.
      Check the voltage of the stater battery with engine in and off. Do the same at both sides of the camper isolation relay. Look or...
    • K7MDL
      6M and 2M loops, plus 6 element 2M yagi on 6ft tall tilt-up mast on roof rack rear bar. Yagi stays parallel to roof. 2 front guy...
      • 20240530_153948.jpg
  • Loading…
Back
Top Bottom