11 replies to this topic

[Casa Escarlata Robles Too]

Thank you all for the responses.  A quick question for those who have built a "shield" around the pilot/burner area.  Did you do anything at the top of the stack or just cover down at the bottom around the pilot?  I'm wondering if there is anyway that wind enters through the top vent and then down the stack creating enough wind to blow it out.  I'm definitely going to work on a shield for the burner area.  

 

Thanks again all.

I just use the shield at the burner area.

I watched a you tube video about upper vent shields but decided not to go with them.

The burner area one works great.

If you need another photo of the shield let me know.

Frank

[carld]

Dave, you might think about just running one hot #10 wire from the battery to the camper and running a short #10 ground from the truck frame to the camper with a star grounding washer.  I don't know why they ran two wires all the way back to the battery on mine but that would be the first thing to change for me.