New Member, built an Interior for Bobcat
#1
Posted 12 July 2008 - 07:22 PM
I've been a lurker here for a couple of months, stealing ideas.
We bought a Bobcat shell, and picked it up in April. I've been building the interior since. Finally got around to putting up a web page with the story.
So, I'll shut up and let you go there,
http://home.comcast....1/MyCamper.html
Questions or comments are welcome.
I would like to thank those here and the FWC board for the ideas.
Retired 2002, living and loving it.
Pleasanton, CA
http://home.comcast....1/MyCamper.html
#2
Posted 12 July 2008 - 09:59 PM
#3
Posted 12 July 2008 - 10:03 PM
Welcome to the board....what a great first post.:thumb: Went through all your pages and enjoyed seeing the build thought process. You did put a lot of time into it and it shows. Resale of this camper value goes up.
I was told many years ago that a person bought a FWC shell and made really nice cabinets but they were fastened to the frame too solid. When this person went off-road the camper flexed and tore the mounts out. Just asking if yours is a loose fit to the frame?
Suggestion: Add a click link to this site on your web page
You can also add your link to a signature line from your profile
What part of the PCT did your wife hike?
Patrick
2015 FWC Hawk Flatbed
#4
Posted 12 July 2008 - 11:06 PM
Sunman2003 Four Wheel Camper -Hawk
2023 All Terrain Camper - Panther 2006 Toyota Tundra Double Cab Limited 4WD
2017 Toyota Tundra Double Cab Limited 4WD
#5
Posted 12 July 2008 - 11:48 PM
I think your tie downs are too solid. Things need to move and flex. The purpose of the tie downs is to keep the camper on the truck.
John D
#6
Posted 13 July 2008 - 12:22 AM
I'm absolutely impressed with the quality of your design and work, fantastic job with all aspects of the build. Yours is one of the two best scratch built interiors I've seen posted here, the other being the gent from back east who used the space age foam sandwich material to save weight. His had a similar seating/table arrangement though his table folded upward. I think your seating set up is ideal and I would have loved to do something like it but didn't have the room in our factory built interior. Great write up and information on your site. A hardy Welcome Aboard & keep posting, we love it.
#7
Posted 13 July 2008 - 12:32 AM
I was told many years ago that a person bought a FWC shell and made really nice cabinets but they were fastened to the frame too solid. When this person went off-road the camper flexed and tore the mounts out. Just asking if yours is a loose fit to the frame?
Patrick,
Since it's a frame design without any real boxes, it's flimsy. I tried to keep from tying it down too well. SHE was on a jeep trail this week, several catches opened up, but I see no damage. Time will tell, we are not real off-roaders, so I'm more afraid of the six year old grandkid.
Tis done.Suggestion: Add a click link to this site on your web page
You can also add your link to a signature line from your profile
What part of the PCT did your wife hike?
SHE is part of a group that is hiking the PCT in disconnected steps. This time it was above Lake Tahoe. They do 1-7 day hikes, depending on trailhead access.
Have Stan and Marty offered you a job?
John,
No, but Marty wanted me to build some mounts for them.
I got too much fun stuff going on, and HATE working on somebody elses timetable.
What do you think might happen? (I have no clue.)I think your tie downs are too solid. Things need to move and flex. The purpose of the tie downs is to keep the camper on the truck.
John D
I saw one picture where the front tie downs pulled out of the bed, didn't like that idea. And the bed bolts, going into that plastic bed are quite a ways away, and bolting thru the plastic bed seems weak. So I went my way. Time will tell.
I'm fixin' to do mine in white oak nautical style m'self soon.
Mark,
Good luck, if you have any questions, send me an email, from my site. Be glad to offer what info I can. And it may give me some more fodder for the website. EDIT: One thing I sort of regret, is using the same species for all the wood, I should have used different ply for the door inserts.
And thanks to the others that have offered a welcome.
EDIT: One other thing about a home brew; it's all screwed together. With my little 3v electric screwdriver, I can disassemble and gut it in less than a day.
Retired 2002, living and loving it.
Pleasanton, CA
http://home.comcast....1/MyCamper.html
#8
Posted 13 July 2008 - 02:52 AM
Don't know if it is worth it to hike the PCT where the wind is blowing in all that smoke from the fires. Wanted to do a hike today up around Tahoe but choose not to.
Your tie down brackets look like they will work out very well. My two different FWC over the years since 1994 both have been bolted through the floor. But the plastic bed wont cut it. At FWC back in 2007 they came up with metal plates that are tied into the frame to use the tiedowns. I see no different outcome the way you have done yours with the end being a solid place to attach the turnbuckle. Here are a few pictures from Stan.
Keep up the good work and thank you for sharing.
Patrick
2015 FWC Hawk Flatbed
#9
Posted 13 July 2008 - 02:59 AM
http://www.wanderthe...p=7295#post7295
Patrick
2015 FWC Hawk Flatbed
#10
Posted 13 July 2008 - 05:50 AM
Patrick,Dave the links work great.........
Yep, I'm getting pretty good, after four whole days of web making.
SHE said the same thing, and canceled next weeks hike. I came back last Saturday on the train, lots of smoke until Sac.Don't know if it is worth it to hike the PCT where the wind is blowing in all that smoke from the fires. Wanted to do a hike today up around Tahoe but choose not to.
The Taco is going to be our only truck pretty soon, (daughter is borrowing little Dodge for a year).Your tie down brackets look like they will work out very well. My two different FWC over the years since 1994 both have been bolted through the floor. But the plastic bed wont cut it. At FWC back in 2007 they came up with metal plates that are tied into the frame to use the tiedowns. I see no different outcome the way you have done yours with the end being a solid place to attach the turnbuckle.
Thanks for the picts, and the link. I had not seen FWC's (only verbal description).
Retired 2002, living and loving it.
Pleasanton, CA
http://home.comcast....1/MyCamper.html
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users