Bolting camper to bed ??
#1
Posted 10 February 2009 - 09:30 PM
Thanks.
marc
2016 Sprinter Silver Gray 144 Std. Roof 4x4. 3.0 diesle, Cooper "Dicoverer" ST Maxx 255/85/16
#2
Posted 10 February 2009 - 10:21 PM
#3
Posted 10 February 2009 - 10:28 PM
#4
Posted 10 February 2009 - 11:16 PM
Patrick was describing his setup to me but I didn't catch it all. Wouldn't mind seeing some details from his bolt job. A bit more complicated that applying a sticker I'm guessing
LOL:o
Here is a picture of what I use. Plate steel inside and outside sandwich. Inside has the corners radius and painted white. Bolt, washers, lock washers, and double nut. You can use any plate size you need.
Don't forget to look under the bed for the easiest place to put them, I.E. don't put them ontop of the gas tank and you can't even reach them. Make it a clear shot and you wont be pissed later. And don't drill through anything.
Patrick
2015 FWC Hawk Flatbed
#5
Posted 10 February 2009 - 11:33 PM
marc
2016 Sprinter Silver Gray 144 Std. Roof 4x4. 3.0 diesle, Cooper "Dicoverer" ST Maxx 255/85/16
#6
Posted 11 February 2009 - 01:13 AM
#7
Posted 11 February 2009 - 02:20 AM
I would try to make the top and bottom washers a little different size to help spread the stresses over a larger area.
I think the plates will take care of that.
2016 Sprinter Silver Gray 144 Std. Roof 4x4. 3.0 diesle, Cooper "Dicoverer" ST Maxx 255/85/16
#8
Posted 13 February 2009 - 12:15 AM
Doug
#9
Posted 14 February 2009 - 05:23 AM
2016 Sprinter Silver Gray 144 Std. Roof 4x4. 3.0 diesle, Cooper "Dicoverer" ST Maxx 255/85/16
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users