![Photo](https://www.wanderthewest.com/forum/uploads/profile/photo-thumb-3005.jpg?_r=1470942666)
Solar panel output
#1
Posted 01 June 2019 - 02:13 PM
This morning it shows 0.
But Volts are 19 and 0 Amps
How can this be?
I tested at the terminal and the panel is at 19 V.
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#2
Posted 01 June 2019 - 02:54 PM
Maybe the battery is full? Following.
Russ
#3
Posted 01 June 2019 - 02:58 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#4
Posted 01 June 2019 - 02:58 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#5
Posted 01 June 2019 - 02:59 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#6
Posted 01 June 2019 - 03:02 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#7
Posted 01 June 2019 - 03:08 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#8
Posted 01 June 2019 - 08:44 PM
2016 Duramax 2.8 Diesel long bed Colorado 4WD with 2011 Eagle
#9
Posted 01 June 2019 - 09:04 PM
I really don't know a lot about solar. I just put morning, and it was charging yesterday. I've read that when no current is needed they are smart enough and don't charge if they don't need to. So was a good guess on my part.What Mr.iowahiker said kinda makes sense ( still learning)about the max voltage and no current.
Thanks for the beer, Amazon just delivered it. It was frothy.
Russ
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users