Greetings
Can anyone recommend a recent good source for cushions and covers ?
We are building the Grandby interior and need some new sleeping cushions.
Pacific Northwest would be handy but not an absolute.
Many thanks
David Graves
Posted 23 July 2021 - 07:47 PM
Greetings
Can anyone recommend a recent good source for cushions and covers ?
We are building the Grandby interior and need some new sleeping cushions.
Pacific Northwest would be handy but not an absolute.
Many thanks
David Graves
Posted 24 July 2021 - 02:25 AM
For foam I can recommend
https://foamonline.com/cube/
For both foam and material for covers for DIY try
https://www.sailrite.com/
However, I don't have a reccomendation where to order a complete foam cushion with cover.
1993 Dodge Cummins W-250 Club Cab long bed, 2007 FWC Keystone
Posted 24 July 2021 - 02:07 PM
Thanks Craig
From what I see online there is a predatory up-charge for anything described as "RV" cushions.
I am exploring some of the furniture providers for a quality foam.
We'll see.
David Graves
Posted 24 July 2021 - 08:10 PM
I ordered custom cushions for my home from Bojer inc. in southern Ca.
They make custom sizes at high quality.
Frank
2002 Tundra AC TRD 4WD Limited 2009 ATC Bobcat loaded http://sharychic.blogspot.com/
Posted 25 July 2021 - 12:04 AM
Thanks Frank
I will take a look.
DG
Posted 27 July 2021 - 01:39 PM
We purchased rollover couch cushions shipped loose with our camper (no rollover couch installed) and found FWC prices to be comparable to any of the online cushion sources I looked at FWIW. Might be worth calling them and asking for a quote, or go through your dealer which is what we did.
Posted 27 July 2021 - 07:21 PM
Thanks
I believe FWC is just too slammed with work now for any extra contact.
I spoke with the parts department several times over the last two weeks asking for two black plastic corner moldings they use on shell models like my 2019 Grandby.
So far no answer whether they have it.... or will sell it...... nor where i can buy it elsewhere.
I am sure they do not produce this plastic extrusion but I have not been able to find it on the web.
David Graves
Posted 31 July 2021 - 01:30 AM
David, ask Marty/Jeff at ATC... they can usually source whatever you need.
Posted 31 July 2021 - 02:10 AM
Thanks Vic
I had not thought of that.
DG
Posted 02 September 2021 - 08:35 PM
0 members, 0 guests, 0 anonymous users