Hi all, I have DeeZee bed mat in the bed of my truck. What do guys do for preperation of the tie down bolts? Slit the rubber, Hole saw a hole big enough in the mat to fit over the bolts. Or just cut off the wings in front and back of the wheel wells? THANKS
Bed mat
#1
Posted 08 January 2022 - 12:03 AM
#2
Posted 08 January 2022 - 12:17 AM
#3
Posted 08 January 2022 - 12:25 AM
FWC Hawk (2005) on a Ford F250 Supercab, 6.8L V10 gas (2000)
#4
Posted 08 January 2022 - 12:39 AM
FWC Slide-in Grandby and OEV Aluma Tray on a Ford F350 Supercab with the 6.2L Gas Engine.
IG: heinphoto
#5
Posted 08 January 2022 - 12:41 AM
Jon R
2021 Grandby Slide-in Front Dinette
2021 GMC 3500HD CC LB SRW Gas
1993 Chevrolet K2500 Ext Cab LB
#6
Posted 08 January 2022 - 01:05 AM
Hole saw 100%.
Use high speed, push slow.
Clean install.
Measure twice. Drill once.
#7
Posted 08 January 2022 - 01:07 AM
Drill hole
Way way cleaner
#8
Posted 08 January 2022 - 01:27 AM
I used a 1.5 inch hole saw to make holes centered over my eye bolts. My mat is a 3/8 thick rubber mat sold by GMC for the truck.
Great idea, thanks for sharing.
I am haunted by waters
#9
Posted 08 January 2022 - 01:58 PM
Thanks for the replies, I will pass along the 1.5 hole saw option to my dealer. About a month to the new GRANDBY is deliverd.
#10
Posted 09 January 2022 - 05:24 AM
I used a 1.5 inch hole saw to make holes centered over my eye bolts. My mat is a 3/8 thick rubber mat sold by GMC for the truck.
I did the same thing.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users