1 reply to this topic

[Go for Broke]

My AC did not come with a table top.

 

It has the metal mounting brackets on the sides of the lower window. Two up, two down.

 

If someone has the table top dimension, please send.

 

Also, any information on the table top mounting system would be appreciated.

 

Thanks,

[Keith in Co]

You don’t mention whether you have a front dinette or side dinette.  I made a new table top for my front dinette because the dimensions of the original required 1x2” slats to convert the table top into a bed foundation, and because the original table surface was worn. Now the table top spans between the seat benches without additional materials. When in the bed mode, the rounded end of the table faces the front wall.  My recollection is that I used 5/8” plywood topped with HDPE sheeting like King Starboard. I used the original 1” aluminum edging, but any suitable edging would work. 
 

Attached Thumbnails

• 
•