Ok, FWC knew exactly where the wires were for the solar panel, they knew where the wires were for the awning light, what I want to know is...........
are there wires at the second location for the roof vent on my 07 Eagle?
Thanks Stan, you're the best.
I only ask here so that it will be common knowledge.
You can always call FWC.
Great people.
Stan, can I go 3 for 3?
Started by
Jeff Wanamog
, Jun 09 2010 02:52 AM
2 replies to this topic
#1
Jeff Wanamog
-
- Members
-
- 70 posts
Advanced Member
- LocationUpland, Ca.
Posted 09 June 2010 - 02:52 AM
"Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!"
— Hunter S. Thompson
2010 Tacoma DC 4X4 with highly modified 07 Eagle.
Heart attack survivor 2/22/2010!
#2
Stan@FourWheel
-
- Members
- 2,376 posts
Senior Member
- LocationWoodland, CA
Posted 09 June 2010 - 07:48 PM
How long is the cabover portion on your Eagle ?
(approx. 39" inches ? ?)
I don't think your camper has what we call the "extended cabover bed" option.
Your camper back in 2007 probably has the "standard cabover bed".
If your camper has the standard cabover, the camper will not be framed or wired for the extra roof vent over the cabover bed.
There wasn't enough room to install the extra vent comfortably on those models, so they didn't offer it as an option, nor did they frame or wire for it back then.
This might not be the answer you were hoping to hear, but I hope it sheads some light on the topic.
Happy Camping !
.
.
(approx. 39" inches ? ?)
I don't think your camper has what we call the "extended cabover bed" option.
Your camper back in 2007 probably has the "standard cabover bed".
If your camper has the standard cabover, the camper will not be framed or wired for the extra roof vent over the cabover bed.
There wasn't enough room to install the extra vent comfortably on those models, so they didn't offer it as an option, nor did they frame or wire for it back then.
This might not be the answer you were hoping to hear, but I hope it sheads some light on the topic.
Happy Camping !
.
.
Stan Kennedy --- Four Wheel Pop-up Campers
1400 Churchill Downs Avenue, Suite A
Woodland, CA 95776
(800) 242-1442 or (530) 666-1442
www.fourwh.com --- e-mail = stan@fourwh.com
#3
Jeff Wanamog
-
- Members
-
- 70 posts
Advanced Member
- LocationUpland, Ca.
Posted 09 June 2010 - 10:29 PM
How long is the cabover portion on your Eagle ?
(approx. 39" inches ? ?)
I don't think your camper has what we call the "extended cabover bed" option.
Your camper back in 2007 probably has the "standard cabover bed".
If your camper has the standard cabover, the camper will not be framed or wired for the extra roof vent over the cabover bed.
There wasn't enough room to install the extra vent comfortably on those models, so they didn't offer it as an option, nor did they frame or wire for it back then.
This might not be the answer you were hoping to hear, but I hope it sheads some light on the topic.
Happy Camping !
.
.
You're right. The cab over is only 39"
When did you start the extended cab over and how much did it add?
Thanks again for your help.
Jeff
"Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!"
— Hunter S. Thompson
2010 Tacoma DC 4X4 with highly modified 07 Eagle.
Heart attack survivor 2/22/2010!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
