My new Raven just arrived and is being installed

BobM

Senior Member
Joined
Nov 2, 2011
Messages
730
Detail on my Raven order are on this thread He's prepping the truck right now so here are some prelim photos, more to follow:

On the Trailer.jpg
Prepping to take off trailer.jpg
Waiting for truck prep.jpg
 
Lucky dog....

Didn't take too long, here's some more photos:
IMG_0155.JPG
IMG_0156.JPG
IMG_0157.JPG
IMG_0159.JPG
IMG_0160.jpg
 
My only dissapointment so far was that I was told that the Thetford Electric Porta/Potty 465 would fit the Raven cubby hold by the door and it doesn't :mad: So I'm out $145.00 if I can't sell it (bought online (no returns)). I'll try to get $100 for it on craigslist.
 
Here's a few more photos before I get mud all over everything :)
IMG_0161.jpg
IMG_0163.jpg
IMG_0164.jpg
 
Looks great, BEWARE of those hanging jacks off road.

Too bad about the toilet.......Don't forget about my solution.

redneck_toilet.jpg
 
I'm pulling the jacks off this weekend. Only 3 bolts per Jack. Will only put on when I want to take the camper off
 
Also, removing the jacks, reduces your weight by 100 lbs
 
Took off the Jacks this weekend, made some mods for the porta potti to fit, made a vented drain adapter and took more photos per some requests. First, some interior photos:
IMG_0165.jpg
IMG_0166.jpg
IMG_0167.jpg
IMG_0168.jpg
IMG_0169.jpg
IMG_0170.jpg
IMG_0171.jpg
IMG_0172.jpg
IMG_0182.jpg
IMG_0183.jpg
And after replacing the 1 1/2" bolt with a 1/14" and a couple of washers I got the porta potti to fit:
IMG_0178.jpg
 
Here are some exterior photos with the top up and and the jacks off:
IMG_0174.jpg
IMG_0176.jpg


And here's a little attachment I made to help the sink drain. Many years ago I had a tent trailer that took forever for the sink to drain so I made an attachment out of PVC, a tee fitting, male and female hose fittings. The top of the tee acts as a vent so the sink drains faster. I noticed the Raven sink had the same problems so I made another one this weekend. Made it short enough to store on top of the holding tank:
IMG_0180.jpg
 
Congratulations. Great looking rig! Now you can enjoy camping without all the hassle.

One comment....replace the FWC thermostat with an inexpensive (cheapo) programmable thermostat from Walmart. It is much more precise and you can program it to turn on the furnace 20 minutes before you get up.....so you will have a warm camper in the morning. Best $19 I ever spent. Mine is a "Hunter" brand....and the installation is simple. Since it is digital....you can set the furnace temperature with pinpoint accuracy.
 
Back
Top Bottom