5 light fixtures is the typical wiring....on the drivers side, furthest back, under the overhead storage, is the first 120v (over the stove)....forward of that there is typically a circular 12v (over the sink) then all the way forward under the storage also is another 12v fixture
the two fixtures on either side of the camper, on the front of the overhead storage are 120v...the one on the drivers side typically had a 120v plug built in the base
If you want to keep the camper original and have the under-cab fixtures intact...the 12v locations can easily be changed to LED using the adhesive strip LED's (cut to size)....the 120v fixtures can be changed over to LED using new bulbs available everywhere and your choice of fixture.....just make sure if you change the one over the stove that the height is matched.....when the camper is in the lowered position...take your measurement for clearance to the stove top.....that fixture was originally glass covered, the 12v's were plastic covered
Good luck....post your decision pictures...many of us are in the same position of replacing fixtures...I just had one of the forward 120v's crumble in my hand while changing the bulb ...(1970)
Edited by Rusty, 01 January 2014 - 05:45 PM.