5 replies to this topic

[Ripperj]

Anyone have a source for the white siding with the 4" creases?
How does it come? Sheets or roll?
Thanks
Keith

[Mike S.]

I redid my top half with new aluminum 2 years ago purchased it from Bryon at Alaskan all cut to fit.  He also had new decal for the sides.  Not a big job.  Came in a roll.  Do you just need the sides or the whole top?

[Ripperj]

Mike- thanks for the reply, mine has a seam on the upper half, where the roof material joins the sides, right along the top of the window, I assume this is typical. Cut to fit! Wow, did it fit nicely? I would think there would be some variations in size, but maybe they used a jig? I will email Alaskan, thanks again, not sure why I assumed it would have to go aftermarket.

[Ripperj]

Forgot to say I only need the back of the upper half and the pieces below the roof seam, front and rear of side windows

[Mike S.]

If your in the pacific north west I have the lower side pieces.  You are welcome to them.  I instaled my aluminum then trimmed around the windows with a router and carbide bit.

[Ripperj]

That's a nice offer, I'm about as far away as I could get without being wet:). (ct)8