Senior Member
Posted 12 July 2022 - 06:49 PM
Just to give you a idea. I have three 160 watt Overland Solar panels on my flatbed hawk. They are on a custom aluminum frame.
The leading edge I added a air dam made out of poly material to prevent air from going under the panels and causing oscillation while driving.
Picture attached.
.
Patrick
2015 FWC Hawk Flatbed
Senior Member
Posted 13 July 2022 - 01:21 AM
Thanks for the replies Guys. Probably put 25,000 miles on the way it is so hoping it will be fine for the next few months. Over and out till sept.
Belay On
Posted 13 July 2022 - 02:23 AM
Happy to, but it will be tomorrow morning.
penner, crazy days here. I'm sorry about not following through. Safe travels and have fun! 
2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln http://ski3pin.blogspot.com/
Senior Member
Posted 13 July 2022 - 12:59 PM
ATC still uses the one piece ribbed style roof they've always used.
Hmmm- my 2018 Panther has a seam down the middle, pretty much the same as the 99 Grandby I sold.
20 F150 4x4 18 ATC Panther
96 F350 4x4 99 FWC Grandby Shell (sold)
15 Aliner Scout
18 Camplite 16TBS
Belay On
Posted 13 July 2022 - 02:40 PM
The roof sheet is manufactured from two pieces. The center seam is pressed together at the factory and is permanently sealed. The more rigid one piece roof sheet is then shipped to the camper builder flat.
2003 Ford Ranger FX4 Level II 2013 ATC Bobcat SE "And in the end, it's not the years in your life that count. It's the life in your years."- Abraham Lincoln http://ski3pin.blogspot.com/
0 members, 0 guests, 0 anonymous users
