From propane to diesel, a heater installation
#31
Posted 29 February 2024 - 08:04 PM
#32
Posted 04 March 2024 - 06:17 PM
I know its hard to see, but the wood was getting to hot so I put a piece of aluminum under it and under that high temp silicon. the exhaust is a high temp bulkhead fitting made for this type application. I will try and attach a pix.
#34
Posted 04 March 2024 - 07:47 PM
#35
Posted 04 March 2024 - 08:26 PM
#36
Posted 05 March 2024 - 08:51 PM
Ran it all night and it is not showing any signs of getting to hot anymore, the aluminum and silicon did the trick.
#37
Posted 06 March 2024 - 02:33 AM
i ran the exhaust from my Propex heater through a 1" hole, with not much clearance around the exhaust tube. Sealed with red high temp silicone. No issues with the plywood getting hot.
2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/
Power considerations thread - https://www.wanderth...e-power-scotty/
Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West
#38
Posted 07 March 2024 - 05:31 PM
#39
Posted 08 March 2024 - 03:34 AM
Dan, I totally agree with you re: fuel and getting it all at once. Glad it is working for you, and your pioneering work with cheap CDH's will be helpful for the rest of us...
2012 ATC Puma Shell build - https://www.wanderth...012-puma-build/
Power considerations thread - https://www.wanderth...e-power-scotty/
Building out an electrical system - So, you want to setup a good electrical system in your camper? - Electrical, Charging, Solar, Batteries and Generators - Wander the West
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users