Looks good!
Platforms under your camper
Started by
Ted
, Nov 07 2010 02:36 AM
34 replies to this topic
#31
Barko1
-
- Members
- 1,635 posts
Senior Member
- LocationSouthern Appalachians
Posted 21 January 2011 - 01:12 PM
Granby on an F250 in S. NM
#32
chnlisle
-
- Members
- 3,811 posts
Post Master
- LocationThe Old Pueblo
Posted 21 January 2011 - 02:05 PM
Nice job.
Special Engel Pricing For WTW Members
Click here to see my ATC Cougar
JayAronowSales.com
(520)579-9610
jayaronow@gmail.com
#33
jcfly
-
- Members
- 209 posts
Senior Member
Posted 22 January 2011 - 05:21 PM
Whizbang, I really like that under camper storage! Job well done.
Jim
2009 Chevy 2500 HD / 2004 FWC Hawk
#34
campito
-
- Members
-
- 64 posts
Advanced Member
- LocationBishop
Posted 02 June 2021 - 03:10 AM
question on an old thread. I need to add a platform in my bed to accomodate a Fleet in a double cab 2005 Tundra.
Ted - how did your solution work? Are there any problems with the cross 2x4's crushing the ribs of the bed with the weight of the camper and added pressures from off road? Were the cross 2 x 4's secured, or just held in place by the camper?
Edited by campito, 02 June 2021 - 03:12 AM.
2012 Fleet, 2005 Tundra
formally know as DonC before all my accounts were hacked
#35
Jack
-
- Members
- 410 posts
Senior Member
- LocationPortland OR
Posted 07 June 2021 - 11:14 PM
I had our 2015 Fleet off our 2019 Ranger (unfortunately, due to tie-down damage to the truck). I have a 1x3 frame with horse stall pad strips between the frame and the Fleet. But there was wear on the ribs and the frame - not much, but only after 20 months. I have added a single piece of (about 1/2" thick) horse stall pad between the frame and the bed. Not only will the pad prevent wear on the bed and frame, but the bottom pad and the upper strips will keep the Fleet from moving latterly and thus reduce stress on the tie downs.
2015 Fleet on 2019 Ranger
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
