Jump to content


Photo
- - - - -

FWC EAGLE - dimensions of roof lift pan

roof panels Eagle roof lift roof lift panels dimensions roof hinges

  • Please log in to reply
6 replies to this topic

#1 joseph.hinker

joseph.hinker

    Member

  • Members
  • PipPip
  • 23 posts

Posted 07 April 2020 - 04:13 AM

Hello WTW,

 

Im rebuilding a FWC Eagle that was once a Grandby. I was wondering if anyone had the dimensions of the roof lift panels. I have the old Grandby ones but they are too big. What I need is:

 

- Length,  width and thickness of the bigger piece 

- Length and width of the smaller piece. 

 

- distance from side of camper to where the panel starts.

 

I have been trying to do research on the panels and I saw that there is a newer wood panel and an older wood panel. The composite panels are really nice, I e-mailed FWC about the them and the price was way out of my budget. 

 

 

Also pictures are great, so post them if you have them.  :)


  • 0

#2 Mark G

Mark G

    Senior Member

  • Members
  • 117 posts
  • LocationMeadow Vista, CA

Posted 10 April 2020 - 04:40 AM

I'll get that tomorrow for you.


  • 1

#3 knoxswift

knoxswift

    Senior Member

  • Members
  • 215 posts
  • LocationAshburn, Virginia

Posted 10 April 2020 - 10:43 AM

I have an Eagle with composite  panels. It's the Extra headroom top. If you like the taller panel measurements let me know. I  forget how much taller it is then stock but it was only offered 1 or 2 years before they canceled the Eagle model.


  • 1

#4 Mark G

Mark G

    Senior Member

  • Members
  • 117 posts
  • LocationMeadow Vista, CA

Posted 10 April 2020 - 05:44 PM

2000 Eagle shell: Overall width: 68", inside width: 65 1/2"

Bottom lift panel is 1/8" masonite, 58" x 22". hinge pin is at 13 1/2"

Top lift panel is 58" x 12 1/4".

Top of sidewall to roof is 25".

Send me an email and I'll send you pix.  mark@markgentry.com


  • 1

#5 joseph.hinker

joseph.hinker

    Member

  • Members
  • PipPip
  • 23 posts

Posted 26 April 2020 - 03:04 AM

I have an Eagle with composite  panels. It's the Extra headroom top. If you like the taller panel measurements let me know. I  forget how much taller it is then stock but it was only offered 1 or 2 years before they canceled the Eagle model.

 

More headroom would be awesome. Do you think you could get me the dimensions?


  • 0

#6 knoxswift

knoxswift

    Senior Member

  • Members
  • 215 posts
  • LocationAshburn, Virginia

Posted 09 May 2020 - 08:04 PM

So sorry I have been offline for a while. I will post dimensions tonight
  • 0

#7 knoxswift

knoxswift

    Senior Member

  • Members
  • 215 posts
  • LocationAshburn, Virginia

Posted 09 May 2020 - 09:11 PM

So again sorry for the delay.

The canvas up is about 30" high.
Inside headroom is about 76"+.

The panel setup is the same front and back.

29 1/4" tall open with the hinges exposed top and bottom.

The top half panel is 47 3/4 wide and 14 1/2" tall.

The bottom half panel is 47 3/4" wide along the bottom and 24" wide at the top.

The line of rivets along the bottom panel measures from the bottom 1/2" and 14" also where the taper down starts to th 24" with at top.

I attached photos in case you want me to measure anything else.

Attached Thumbnails

  • 20200509_164536_resized.jpg
  • 20200509_164629_resized.jpg

Edited by knoxswift, 09 May 2020 - 09:17 PM.

  • 0





Also tagged with one or more of these keywords: roof panels, Eagle, roof lift, roof lift panels, dimensions, roof hinges

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users